Thanks for the report! Helps a lot. reselecting cells isn't an error or unusual behaviour. In fact that's what the phone is supposed to do, as long as it's two BTS with same signal-level, and the phone doesn't *transmit* every time to re-associate to the network
Please see Wolfgang's mail about NDA. Cable probably needs another pinout for the 2.5mm jack, if anything. cheers jOERG Am Di 16. Dezember 2008 schrieb Al Johnson: > On Monday 15 December 2008, Joerg Reisenweber wrote: > > Are you living in an area where many people use their cellphone, but only > > few BS around? We have some cloudy theory this might be a trigger for > > #1024. A very good indication would be #1024 showing up on certain daytime > > while never seen at deep in the night. Another indicator for a situation > > matching our "crowded-BS"-theory is an occasional failure of non-FR > > cellphones to connect an outbound call (unusual "busy" on dialing out, or > > just nothing happens when you push green button), so you would have to > > retry until a resource (channel) is free at BS. > > That doesn't fit my experience of #1024. I get intermittent reregistration > problems with Orange, t-mobile and O2 in the UK, although it has the t-mobile > SIM in most of the time. The O2 SIM has only been working since moko10 was > released, and I haven't done much with it. There is no pattern to the day, or > the time of day, that I have spotted. I have never had the trouble you > describe when making calls. The reregistrations can be regular every ~20 > seconds, or irregularly at larger intervals. The regular reregistrations > trigger the detection in ogsmd, but the irregular ones do not occur > frequently enough to trigger it. > > IIRC I have good signal strength from at least 3 cells, of which the stronger > two have similar signal strength. The phone often moves seamlessly between > these two, occasionally switching to the third. I have only looked at this in > detail once and I don't remember if it was Orange or t-mobile. > > I am happy to record some logs if you can make PCO2 available to me, and could > solder up the required cable if given the pinouts. If I'm lucky it'll be the > same as for the Neuros OSD cable that's around here somewhere. > > _______________________________________________ > hardware mailing list > [email protected] > http://lists.openmoko.org/mailman/listinfo/hardware >
signature.asc
Description: This is a digitally signed message part.
_______________________________________________ hardware mailing list [email protected] http://lists.openmoko.org/mailman/listinfo/hardware
