Sorry my mailing tool was faster than me! Hi, I'm reading out the Acc Values from the new device name: Acc1: /sys/class/i2c-adapter/i2c-0/0-0073/lis302dl.1 Acc2: /sys/class/i2c-adapter/i2c-0/0-0073/lis302dl.2
But I get strange values. I set the device to 100 Hz that means I should get one (3D) value every 10 ms but I get two even with a different time stamp whitch differs round about 0.4 ms. Because of the axis orientation it cannot be from the second Accelerometer. This log I recorded from the first accelerometer with 100 Hz. (If set to 400 Hz I get two values every 2.5 milliseconds) What's going wrong? [mili seconds] [X-Value] [Y-Value] [Z-Value] 761.370972 0.384486 -0.133511 8.770032 761.744995 0.384333 -0.133732 8.770234 771.169006 0.384194 -0.133953 8.770455 771.552002 0.384067 -0.134173 8.770696 780.945984 0.383952 -0.134391 8.770953 781.161987 0.383846 -0.134604 8.771228 790.721008 0.383749 -0.134813 8.771520 790.937012 0.383667 -0.135022 8.771827 800.564026 0.383606 -0.135238 8.772151 800.775024 0.383569 -0.135466 8.772492 810.315002 0.383556 -0.135704 8.772849 810.536011 0.383564 -0.135948 8.773211 820.111023 0.383588 -0.136196 8.773564 820.304993 0.383626 -0.136446 8.773902 829.940979 0.383677 -0.136694 8.774227 830.156006 0.383737 -0.136940 8.774551 839.750000 0.383805 -0.137180 8.774886 839.966003 0.383878 -0.137413 8.775231 849.533020 0.383954 -0.137638 8.775575 849.750000 0.384033 -0.137852 8.775908 Any idea? Greets Michael _______________________________________________ hardware mailing list [email protected] http://lists.openmoko.org/mailman/listinfo/hardware
