There acually is a standard connector inside the case. If you looks at the neo's pcb from the back, it's on the bottom left. It uses a standard connector that's also used e.g. inside the nintendo ds and other wireless equipement. I guess it would be no problem to just drill a hole into the case and fit some kind of adaptor to, say, sma. Be very careful with the neo's connector though, as this kind of jack is made for less than 10 pluggings. If someone knows the exact name of the neos connector you could just get some of those from your local electronics supplier and make an adaptor yourself.
Happy hacking, Thomas Sanladerer Daemon D schrieb: > I ordered the Neo Freerunner to use in my apartment but find that the public > wifi that I normally use is too weak a signal for the Freerunner to pick up. > Any suggestions? The external antenna jack is only for GPS right? > > Are there schematics where I could locate proper solder points to install an > external wifi jack so I can use a cantenna type arrangement? Would that even > be feasible for someone with very minimal component level understanding but > posesses a soldering iron and dremel with the knowledge to use them? > > - Daemon > > _______________________________________________ > hardware mailing list > [email protected] > http://lists.openmoko.org/mailman/listinfo/hardware > > _______________________________________________ hardware mailing list [email protected] http://lists.openmoko.org/mailman/listinfo/hardware
