2009/8/23 Christoph Mair <m...@chonyota.net>: > The voltage is now between 3.32V and 3.44V which seems to be ok,
Nice. > but after > suspending it still drops to 2.44V Vmax and 1.78V Vmin (when the compass chip > starts a measurement). Just to make sure I got you right: You enable the "g-sensor" and get about 3.3V, then you suspend and _while suspended_ you get 2.4V and 1.8V respectively? What happens when you resume? Do you get back 3.3V? If this is the case you probably don't set GPD12/13 (CS), GPG7 (CLK), GPG6 (MOSI) to 0 and GPG5 (MISO) to pulldown during suspend and leak the voltage from the CPU. Can you please make sure you set those pins during suspend! Sven _______________________________________________ hardware mailing list hardware@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/hardware
