When:  September 20, 2017 8PM (7:30PM for Q&A)
Topic: Bill's annual crypto talk and PGP/GnuPG Keysigning Party XVII
Moderators: Bill Ricker
Location: MIT Building E-51, Room 315
*** Note new Time ****
As a result of the new MIT parking regulations, we will be holding our meetings later than usual. There should be plenty of metered parking available. In Cambridge the meters are free after 8PM. See parking note below.

Summary:

Bill's annual crypto talk, plus our annual PGP keysigning party. Register your key in advance to participate!

PGP keysigning party. Register your key in advance to participate!


Abstract:

Crypto News Review
Annual Historical Vignette

Re Keys for Key-signing, we should announce (in addition to what we've
said before)

* We will NO LONGER sign RSA or DSA 1024b keys (or shorter). Obsolete.
* We will NOT sign RSA 2048b keys without expiration dates or
expiration dates beyond 2020.
* Use RSA 4096 for gpg2 --gen-key

Notes
* If concerned about well-capitalized massive factoring dictionaries,
subtract a small multiple of 8 bits to get a size that is not standard
and thus won't be dictionaried.
* Alas the one trustworthy ECC curve,  ed25519, is supported only in
GPG 2.1.7+ (gpg2)
only with developer version of a library and in experimental mode.
* But do start using ed25519 for efficiency and security with any SSH
servers updated to handle it
 ssh-keygen -a 100 -t ed25519 # EdDSA Twisted Edward curves.

We hold our annual keysigning party.

A key signing party is a get-together of people who use the PGP encryption system with the purpose of allowing those people to sign each others keys. Key signing parties serve to extend the web of trust to a great degree. Key signing parties also serve as great opportunities to discuss the political and social issues surrounding strong cryptography, individual liberties, individual sovereignty, and even implementing encryption technologies or perhaps future work on free encryption software.

The basic workflow of signing someone's key is as follows:

Verify that the person actually is who they claim to be;
Have them verify their key ID and fingerprint;
Sign their key;
Send the signed key back to them

At the meeting, we go through the first two steps. Each person who preregistered their key will announce their presence and then read off their key ID and fingerprint, so everyone can verify that their copy of the list of keys is correct. Once we've run down the list, we line up, and each of us examines everyone else's photo IDs to verify that they are who they claim to be. After the meeting is over, each participant can then retrieve the keys that they've personally verified, sign those keys, and send the signed keys back to their respective owners.

In order to complete the keysigning in the allotted time, we follow a formal procedure as seen in V. Alex Brennen's “GnuPG Keysigning Party HOWTO”, attached below. It is strongly advised that if you have not been to a keysigning party before, you read this document. We're using the List-based method for this keysigning party, and the keyserver at subkeys.pgp.net.

It is essential that, before the meeting, you register on the signup form listed in the attachments. You should bring at least one picture ID with you. You must also bring your own printout of the report on that page, so you can check off the names/keys of the people you have personally verified.

The list will be printed on Wednesday afternoon, the day of the meeting; be sure to register your key for the keysigning before that. The official cutoff time is 3:00 pm.

BLU keysigning Registration :
http://blu.org/keysignings/keypartyregister.php

GnuPG Keysigning Party HOWTO:
https://herrons.com/keysigning-party-guide/

GNU Privacy Guard: https://www.gnupg.org/

For further information and directions please consult the BLU Web site
http://www.blu.org
*** Parking Notice *** *** MIT just changed to new parking regulations ***
Parking at MIT without a Permit
MIT parking permits are required for all vehicles on MIT property.
Vehicles without MIT parking permits parked in any MIT parking area will be subject to ticketing or towing. ​

After Hours
Anyone with a valid MIT parking permit can park his/her vehicle in any parking facility on campus after 2:30 PM, Monday through Friday, and all day on weekends and MIT holidays. Please note that parking is only allowed in spots that are not otherwise reserved.

​Change here is that permits for any lot now valid in all lots after 2:30; previously permits were not required per website after 5 and in reality after 3, but now no. Parking is at risk. Cambridge meters and the pay lots and garages are the only safe options. Note also that Cambridge meters in the Kendall area. The Passport app is only usable in Harvard Sq.

Parking meters are free after 8PM. before that they cost $1.25/Hr, and only take quarters.


After the meeting we will adjourn to the official after meeting meeting
location at The Cambridge Brewing Company
http://www.cambridgebrewingcompany.com/


For further information and directions please consult the BLU Web site
http://www.blu.org
Please note that there is usually plenty of free parking in the E-51
parking lot at 2 Amherst St, or directly on Amherst St.

After the meeting we will adjourn to the official after meeting meeting
location at The Cambridge Brewing Company
http://www.cambridgebrewingcompany.com/

--
Jerry Feldman <g...@blu.org>
Boston Linux and Unix
PGP key id:3BC1EB90
PGP Key fingerprint: 49E2 C52A FC5A A31F 8D66  C0AF 7CEA 30FC 3BC1 EB90





























































_______________________________________________
Announce mailing list
annou...@blu.org
http://lists.blu.org/mailman/listinfo/announce
_______________________________________________
Hardwarehacking mailing list
Hardwarehacking@blu.org
http://lists.blu.org/mailman/listinfo/hardwarehacking

Reply via email to