On Tue, 2008-05-06 at 10:47 +0200, Marc Poulhiès wrote: > Hi ! > > (Sorry for the "fake" answer, I was not subscribed when the original mail > was sent.) > > I have the exact same problem as Fabian (except that I have a h5500): > when I start haret, screen goes black, it displays messages about mmu, > and then it stops at "Jumping to kernel". > > I tried with 3 different setups: > > - angstrom stable with separate startup.txt, kernel and root. I'm > trying to boot from SD card; > > - angstrom liveram exec, which contains everything (kernel, haret, > rootfs); > > - a home made angstrom 2008.1; > > I know that the kernels should boot as I succeeded by using another > method (using the old familiar method: bootload, flashing rootfs, etc). > > No luck so far :( I would be glad to help find the problem !
Hi again ! After digging in haret ml, I found older versions of HaRET, so I tried some, to see if I could have more luck with one... :( I tried with different versions of HaRET: - haret-20080412.exe : Faulty behavior* - 0.5.1 : Faulty behavior* - 0.5.0 : Faulty behavior* - 0.4.8 : Faulty behavior* - 0.4.7 : UNDEF MTYPE - 0.4.4 : UNDEF MTYPE - 0.4.0 : freezes WinCE without telling anything :) My PPC version is 1.10.05 FRA I guess I may be doing something wrong... I'm using files from angstrom: http://www.angstrom-distribution.org/releases/2007.12/images/h5000/ *Faulty behavior: HaRET boot Shutting down hardware Turning off MMU... In preloader Tags relocated Kernel relocated Initrd relocated PSR=600000df Jumping to Kernel... Any help welcomed :) Marc _______________________________________________ Haret mailing list [email protected] https://handhelds.org/mailman/listinfo/haret
