Just a quick update, I found a very old 2.6.12 kernel (by going back through the wiki revisions for the project home page) this is about 900kb and only has support for running an initrd image and this will boot with a standard haret version. However when I replace the kernel with one of the larger (just over 1mb) kernels it fails to boot again unless I use the pre-0.4.9/modified 0.3.7 haret.
So maybe this issue is to do with the kernel size? Thanks, Daniel Quoting [email protected]: > Version 0.5.1, 0.5.2, 0.3.8 all resulted in the device resetting before any > loading > messages appeared on the screen. > Version 0.3.7-rx1950 (from the rx1950 port page) did boot the kernel ok (but > failed > to find the rootfs) > Version haret-pre 0.4.9-20070620-152948 (can't remember where I got this > from) boots > fine (but freezes during loading opie) > > Both the rx3000 and rx1950 ports have always hosted a separate customized > haret > version (though the rx3000 project seems to have lost it's file host > recently) I > would like to determine whats causing this rather erratic behavior as it > makes > working with linux very much hit and miss. Any help would be appreciated in > this > matter, I would happily compare other versions of haret if you can point me > to > download links. -------------------------------------------------------------- Sent with "Me-Mail", Boltblue's FREE mobile messaging service. http://www.boltblue.com _______________________________________________ Haret mailing list [email protected] https://handhelds.org/mailman/listinfo/haret
