Hi,
I'm using Appia 3.1 with Sequoia 2.7 without communication problems.
I'll test Appia with Sequoia 2.8 ASAP to give you some feedback.
By taking a look on the output of the controllers, I can see that
they exchange messages and join the group. The thousands of messages
that you see on the 2nd controller is the token message of the total
order protocol. It is normal and is just a short token that one
member gives to the other because it does not have any messages to send.
So, it seems that Appia is running normally. The issue can be on the
binding between Appia and Hedera or on Sequoia.
Does the 1st controller also outputs the token messages?
Is the virtual database configuration compatible with the other
controller?
I'll give you some feedback as soon as I test Appia with 2.8.
Kind regards,
Nuno Carvalho
On May 3, 2006, at 4:20 PM, Schnabl, Sebastian wrote:
Hello,
Using appia 3.1 with sequoia 2.8. Regardless of which cannel i
configure in appia.xml, the communication between the controller
seems to hang after the first message.
Controller 1 logs following output:
2006-05-03 17:07:43,002 INFO controller.virtualdatabase.qualiproof
Using Hedera properties file: /hedera_appia.properties
2006-05-03 17:07:44,016 DEBUG continuent.hedera.channel Channel
joined, local membership set to: Member
(address=test92.dresden.local/192.168.10.92:32799,
uid=test92.dresden.local/192.168.10.92:32799)
2006-05-03 17:07:44,022 DEBUG continuent.hedera.gms Appia reported
new view:
version: 1
group: [Group:qualiproof]
id: [ViewID:0;[EMAIL PROTECTED]:32799]]
previous: []
view: [EMAIL PROTECTED]:32799],]
addresses: [test92.dresden.local:32799,]
2006-05-03 17:07:46,026 INFO controller.virtualdatabase.qualiproof
Group qualiproof connected to Member(address=test92.dresden.local/
192.168.10.92:32799, uid=test92.dresden.local/192.168.10.92:32799)
2006-05-03 17:07:46,028 INFO controller.virtualdatabase.qualiproof
First controller in group qualiproof
2006-05-03 17:07:46,029 DEBUG controller.RequestManager.qualiproof
Setting controller identifier to 0 (shifted value is 0)
2006-05-03 17:07:46,033 INFO controller.core.Controller Adding
VirtualDatabase qualiproof
2006-05-03 17:09:37,875 DEBUG continuent.hedera.gms Appia reported
block()
2006-05-03 17:09:39,383 DEBUG continuent.hedera.gms Appia reported
new view:
version: 1
group: [Group:qualiproof]
id: [ViewID:1;[EMAIL PROTECTED]:32799]]
previous: [[ViewID:0;[EMAIL PROTECTED]:32799]],
[ViewID:0;[EMAIL PROTECTED]:32808]],]
view: [EMAIL PROTECTED]:32799],
[EMAIL PROTECTED]:32808],]
addresses: [test92.dresden.local:32799,192.168.10.94:32808,]
2006-05-03 17:09:39,385 DEBUG continuent.hedera.gms Member
(address=192.168.10.94/192.168.10.94:32808,
uid=192.168.10.94/192.168.10.94:32808) joins Group(gid=qualiproof).
2006-05-03 17:09:39,860 DEBUG continuent.hedera.channel Received
Message
2006-05-03 17:09:39,860 DEBUG continuent.hedera.channel received
message NOT fragmented
2006-05-03 17:10:16,935 INFO controller.virtualdatabase.qualiproof
Member(address=test92.dresden.local/192.168.10.92:32799,
uid=test92.dresden.local/192.168.10.92:32799) see members:[Member
(address=192.168.10.94/192.168.10.94:32808,
uid=192.168.10.94/192.168.10.94:32808), Member
(address=test92.dresden.local/192.168.10.92:32799,
uid=test92.dresden.local/192.168.10.92:32799)] and has mapping:
{Member(address=test92.dresden.local/192.168.10.92:32799,
uid=test92.dresden.local/192.168.10.92:32799)=192.168.10.92:1090}
Controller 2 stops at following output:
2006-05-03 17:09:36,670 INFO controller.virtualdatabase.qualiproof
Using Hedera properties file: /hedera_appia.properties
2006-05-03 17:09:39,821 INFO controller.virtualdatabase.qualiproof
Group qualiproof connected to Member(address=test94.dresden.local/
192.168.10.94:32808, uid=test94.dresden.local/192.168.10.94:32808)
2006-05-03 17:09:39,822 INFO controller.virtualdatabase.qualiproof
Group now contains 2 controllers.
2006-05-03 17:09:39,822 INFO controller.virtualdatabase.qualiproof
Checking virtual database configuration with remote controllers.
And nothing happens any more from here on. If i switch to debug-
output, i see thousands of messages (?) running through the console
like:
2006-05-03 16:44:30,945 DEBUG total.token.TotalTokenSession My rank
= 1 hasToken = 0
2006-05-03 16:44:30,945 DEBUG total.token.TotalTokenSession
Received Group Sendable from the network with seq = 14701 token = true
2006-05-03 16:44:30,946 DEBUG total.token.TotalTokenSession
Delivering message with seq = 14701
2006-05-03 16:44:30,946 DEBUG total.token.TotalTokenSession I'll
try to send some messages
2006-05-03 16:44:30,946 DEBUG total.token.TotalTokenSession I do
not have any messages. Rotanting token. My rank is 1
Any help ?
______________________________________________________________
Sebastian Schnabl
Qualitype AG
Quality Assurance Systems |Bioinformatics
Moritzburger Weg 67 | 01109 Dresden
fon +49.351.8838 0 | fax +49.351.8838 2809
http://www.qualitype.de
______________________________________________________________
_______________________________________________
Hedera mailing list
[email protected]
https://forge.continuent.org/mailman/listinfo/hedera
_______________________________________________
Hedera mailing list
[email protected]
https://forge.continuent.org/mailman/listinfo/hedera
