On Thursday 10 February 2011, Orestes Mas wrote: > I'm facing a weird result when I simulate a simple inverter > amplifier built around an operational amplifier. Basically > I'm trying to obtain the input- output transfer > characteristic (for educational purposes), but if the number > of points in the DC command is low, I obtain an spurious > peak at the output.
As Gena said, tighten the tolerance. In this case, a macro model, only a few components are checked for convergence. With an all-transistor model of an op-amp, the output transistors would be checked for convergence, which would usually force more iterations even though the input difference is small. In this model, the output section is linear, with no convergence checking. The input transistors are checked, but voltage and current are small, so it is easy for errors to slip by. Gena said to tighten abstol. This is good advice. It might be a good idea to also tighten vntol. The changes you made to the model, replacing "poly" devices with a multi-element equivalent, is not as equivalent as it might look. The "poly" elements are checked for convergence. The linear replacements are not. _______________________________________________ Help-gnucap mailing list [email protected] http://lists.gnu.org/mailman/listinfo/help-gnucap
