How would I enter this set of model parameters?
.model 1N4007 D(IS=7.02767n RS=0.0341512 N=1.80803 EG=1.05743 XTI=5 BV=1000 IBV=5e-08 CJO=1e-11 VJ=0.7 M=0.5 FC=0.5 TT=1e-07
mfg=OnSemi type=silicon)
I ran it and got errors, so deleted parts:
.model 1N4007 D(IS=7.02767n RS=0.0341512 N=1.80803 EG=1.05743 XTI=5 BV=1000
IBV=5e-08 CJO=1e-11 VJ=0.7 M=0.5 FC=0.5 TT=1e-07 )
and gnucap says, "non-recoverable convergence failure, reducing (itl4)
newtime=3.300000e-05 rejectedtime=3.300000e-05 oldtime=3.300000e-05
using=3.300000e-05
tried everything, still doesn't work, giving up"
deleted some more and added params for a 3Vf drop HV diode with BV=4000:
.model 1N4007 D(IS=7.02767n RS=0.0341512 N=1.80803 EG=1.05743 XTI=5 BV=4000
IBV=5e-08 CJO=1e-11 VJ=2.7 M=0.5 FC=0.5 )
and no errors.
Am I OK? where to find more documentation on spice models for diodes and
transistors?
Where to find ones that work well with gnucap as is?
_______________________________________________
Help-gnucap mailing list
[email protected]
https://lists.gnu.org/mailman/listinfo/help-gnucap
