This is very odd. Can you create any files in that directory? i.e. have you tried
$ mkdir /tmp/gnunet-system-runtime $ touch /tmp/gnunet-system-runtime/test BR > On 3. Feb 2020, at 19:53, Vikas Maurya <[email protected]> wrote: > > Hi, > I have uninstalled and reinstalled gnunet using the installation guide > mentioned above https://gnunet.org/en/install.html > I followed all the steps to completion.but I am still not able to run the > services and logfile shows the same error messages. > > <snip> > $ gnunet-arm -I > Services (excluding stopped services): > (started: 5 / failed: 6 / stopped: 31) > gns (binary='gnunet-service-gns', status=failed, exit_status=255, > restart_delay='183 ms') > zonemaster (binary='gnunet-service-zonemaster', status=started) > zonemaster-monitor (binary='gnunet-service-zonemaster-monitor', > status=started) > nse (binary='gnunet-service-nse', status=failed, exit_status=255, > restart_delay='218 ms') > fs (binary='gnunet-service-fs', status=failed, exit_status=255, > restart_delay='223 ms') > cadet (binary='gnunet-service-cadet', status=failed, exit_status=255, > restart_delay='225 ms') > revocation (binary='gnunet-service-revocation', status=failed, > exit_status=255, restart_delay='206 ms') > topology (binary='gnunet-daemon-topology', status=started) > dht (binary='gnunet-service-dht', status=failed, exit_status=255, > restart_delay='184 ms') > hostlist (binary='gnunet-daemon-hostlist', status=started) > namestore (binary='gnunet-service-namestore', status=started) > > <snip> > <snip> > 1 Feb 03 19:47:57-490752 arm-8968 ERROR `mkdir' failed on file > `/tmp/gnunet-system-runtime//gnunet-service-dns.sock' at > gnunet-service-arm.c:467 with error: Permission denied > 2 Feb 03 19:47:57-491004 arm-8968 WARNING Unable to bind listening socket > for service `dns' to address > `/tmp/gnunet-system-runtime//gnunet-service-dns.sock': Address already in use > 3 Feb 03 19:47:57-491240 arm-8968 ERROR `mkdir' failed on file > `/tmp/gnunet-system-runtime//gnunet-service-peerstore.sock' at > gnunet-service-arm.c:467 with error: Permission denied > 4 Feb 03 19:47:57-491289 arm-8968 WARNING Unable to bind listening socket > for service `peerstore' to address > `/tmp/gnunet-system-runtime//gnunet-service-peerstore.sock': Permission > denied > 5 Feb 03 19:47:57-491340 arm-8968 ERROR `mkdir' failed on file > `/tmp/gnunet-system-runtime//gnunet-service-set.sock' at > gnunet-service-arm.c:467 with error: Permission denied > 6 Feb 03 19:47:57-491382 arm-8968 WARNING Unable to bind listening socket > for service `set' to address > `/tmp/gnunet-system-runtime//gnunet-service-set.sock': Address already in use > 7 Feb 03 19:47:57-491472 arm-8968 WARNING `unlink' failed on file > `/tmp/gnunet-system-runtime//gnunet-service-transport.sock' at network.c:238 > with error: Permission denied > 8 Feb 03 19:47:57-491502 arm-8968 WARNING `unlink' failed on file > `/tmp/gnunet-system-runtime//gnunet-service-transport.sock' at network.c:238 > with error: Permission denied > 9 Feb 03 19:47:57-491522 arm-8968 WARNING Unable to bind listening socket > for service `transport' to address > `/tmp/gnunet-system-runtime//gnunet-service-transport.sock': Address alr > eady in use > 10 Feb 03 19:47:57-491600 arm-8968 WARNING `unlink' failed on file > `/tmp/gnunet-system-runtime//gnunet-service-regex.sock' at network.c:238 with > error: Permission denied > 11 Feb 03 19:47:57-491620 arm-8968 WARNING `unlink' failed on file > `/tmp/gnunet-system-runtime//gnunet-service-regex.sock' at network.c:238 with > error: Permission denied > 12 Feb 03 19:47:57-491632 arm-8968 WARNING Unable to bind listening socket > for service `regex' to address > `/tmp/gnunet-system-runtime//gnunet-service-regex.sock': Address already in > use > 13 Feb 03 19:47:57-491665 arm-8968 ERROR `mkdir' failed on file > `/tmp/gnunet-system-runtime//gnunet-service-nat.sock' at > gnunet-service-arm.c:467 with error: Permission denied > 14 Feb 03 19:47:57-491703 arm-8968 WARNING Unable to bind listening socket > for service `nat' to address > `/tmp/gnunet-system-runtime//gnunet-service-nat.sock': Permission denied > 15 Feb 03 19:47:57-491762 arm-8968 ERROR `mkdir' failed on file > `/tmp/gnunet-system-runtime//gnunet-service-dht.sock' at > gnunet-service-arm.c:467 with error: Permission denied > 16 Feb 03 19:47:57-491799 arm-8968 WARNING Unable to bind listening socket > for service `dht' to address > `/tmp/gnunet-system-runtime//gnunet-service-dht.sock': Address already in use > 17 Feb 03 19:47:57-491858 arm-8968 WARNING `unlink' failed on file > `/tmp/gnunet-system-runtime//gnunet-service-conversation.sock' at > network.c:238 with error: Permission denied > 18 Feb 03 19:47:57-491877 arm-8968 WARNING `unlink' failed on file > `/tmp/gnunet-system-runtime//gnunet-service-conversation.sock' at > network.c:238 with error: Permission denied > 19 Feb 03 19:47:57-491889 arm-8968 WARNING Unable to bind listening socket > for service `conversation' to address > `/tmp/gnunet-system-runtime//gnunet-service-conversation.sock': Addre ss > already in use > 20 Feb 03 19:47:57-491948 arm-8968 WARNING `unlink' failed on file > `/tmp/gnunet-system-runtime//gnunet-service-namecache.sock' at network.c:238 > with error: Permission denied > 21 Feb 03 19:47:57-491967 arm-8968 WARNING `unlink' failed on file > `/tmp/gnunet-system-runtime//gnunet-service-namecache.sock' at network.c:238 > with error: Permission denied > 22 Feb 03 19:47:57-491978 arm-8968 WARNING Unable to bind listening socket > for service `namecache' to address > `/tmp/gnunet-system-runtime//gnunet-service-namecache.sock': Address alr > eady in use > 23 Feb 03 19:47:57-492046 arm-8968 WARNING `unlink' failed on file > `/tmp/gnunet-system-runtime//gnunet-service-statistics.sock' at network.c:238 > with error: Permission denied > 24 Feb 03 19:47:57-492064 arm-8968 WARNING `unlink' failed on file > `/tmp/gnunet-system-runtime//gnunet-service-statistics.sock' at network.c:238 > with error: Permission denied > 25 Feb 03 19:47:57-492085 arm-8968 WARNING Unable to bind listening socket > for service `statistics' to address > `/tmp/gnunet-system-runtime//gnunet-service-statistics.sock': Address a > lready in use > <snip> > > Thanks, > Vikas > > On Mon, Feb 3, 2020 at 5:20 PM Schanzenbach, Martin <[email protected]> > wrote: > Hi, > > 0. make sure you kill all processes of gnunet. > 1. Then run ./configure again (so that you get the text at the end). Do what > is written there. > 2. Run make and make install again. > 3. Try running it again. > > > Alternatively, maybe check of of the installation guides here: > https://gnunet.org/en/install.html > They include the steps you have to take. > > BR > Martin > > > On 3. Feb 2020, at 16:57, Vikas Maurya <[email protected]> wrote: > > > > Hi, > > I used the following installation guide (compiled and installed using > > source code) > > https://docs.gnunet.org/tutorial/gnunet-tutorial.html/Installation.html#Installation > > > > but I am not sure if I followed the ./configure steps > > > > what can I do now to correct it? > > > > I tried running after killing all gnunet process, But wasn't able to run > > all services and got same error messages in log file. > > > > Thanks, > > Vikas > > > > On Mon, Feb 3, 2020 at 4:34 PM Schanzenbach, Martin > > <[email protected]> wrote: > > Hi, > > > > did you follow one of the installation guides? > > As what user are you trying to start GNUnet? > > Did you follow the instructions printed after you did './configure'? > > > > My guess the issue is with one of the above. > > Also check if any gnunet processes are currently running and kill them > > before you try again. > > > > BR > > Martin > > > > > On 3. Feb 2020, at 16:11, Vikas Maurya <[email protected]> wrote: > > > > > > > > > > > > ---------- Forwarded message --------- > > > From: Vikas Maurya <[email protected]> > > > Date: Mon, Feb 3, 2020 at 4:09 PM > > > Subject: Re: no peer visible > > > To: Schanzenbach, Martin <[email protected]> > > > > > > > > > Hi, > > > This is common sequence of errors in the log file. I have also attached > > > log file for your reference. one more thing to mention when I run sudo ss > > > -ntlp, I see that gnunet-service is already listening on port 2086, even > > > before running gnunet-arm -s . Is this a common behaviour? because one of > > > the error in log file says port already in used > > > $ sudo ss -ntlp > > > State Recv-Q Send-Q Local > > > Address:Port Peer Address:Port > > > > > > LISTEN 0 5 > > > 0.0.0.0:2086 0.0.0.0:* > > > users:(("gnunet-service-",pid=2144,fd=12)) > > > LISTEN 0 80 > > > 127.0.0.1:3306 0.0.0.0:* > > > users:(("mysqld",pid=1783,fd=21)) > > > LISTEN 0 128 > > > 127.0.0.53%lo:53 0.0.0.0:* > > > users:(("systemd-resolve",pid=891,fd=13)) > > > LISTEN 0 5 > > > 127.0.0.1:631 0.0.0.0:* > > > users:(("cupsd",pid=12959,fd=7)) > > > LISTEN 0 5 > > > [::]:2086 [::]:* > > > users:(("gnunet-service-",pid=2144,fd=11)) > > > LISTEN 0 5 > > > [::1]:631 [::]:* > > > users:(("cupsd",pid=12959,fd=6)) > > > logfile output. > > > > > > <snip> > > > 60 Feb 03 16:00:25-207988 revocation-22631 ERROR `mkdir' failed on file > > > `/tmp/gnunet-system-runtime//gnunet-service-revocation.sock' at > > > service.c:1140 with error: Permission denied > > > 61 Feb 03 16:00:25-208096 nse-22642 ERROR Could not bind to any of the > > > ports I was supposed to, refusing to run! > > > 62 Feb 03 16:00:25-208239 util-service-22631 ERROR `bind' failed at > > > service.c:1405 with error: Permission denied > > > 63 Feb 03 16:00:25-208281 revocation-22631 ERROR `bind' failed at > > > service.c:1558 with error: Success > > > 64 Feb 03 16:00:25-208304 revocation-22631 ERROR Could not bind to any > > > of the ports I was supposed to, refusing to run! > > > 65 Feb 03 16:00:25-208924 arm-22628 WARNING Service `nse' terminated > > > with status exit/255, will restart in 4 ms > > > 66 Feb 03 16:00:25-209153 arm-22628 WARNING Service `revocation' > > > terminated with status exit/255, will restart in 1 ms > > > 67 Feb 03 16:00:25-215409 gns-22632 ERROR `mkdir' failed on file > > > `/tmp/gnunet-system-runtime//gnunet-service-gns.sock' at service.c:1140 > > > with error: Permission denied > > > 68 Feb 03 16:00:25-215592 util-service-22632 ERROR `bind' failed at > > > service.c:1405 with error: Permission denied > > > 69 Feb 03 16:00:25-215627 gns-22632 ERROR `bind' failed at > > > service.c:1558 with error: Success > > > 70 Feb 03 16:00:25-215648 gns-22632 ERROR Could not bind to any of the > > > ports I was supposed to, refusing to run! > > > 71 Feb 03 16:00:25-216175 revocation-22643 ERROR `mkdir' failed on file > > > `/tmp/gnunet-system-runtime//gnunet-service-revocation.sock' at > > > service.c:1140 with error: Permission denied > > > 72 Feb 03 16:00:25-216303 util-service-22643 ERROR `bind' failed at > > > service.c:1405 with error: Permission denied > > > 73 Feb 03 16:00:25-216337 revocation-22643 ERROR `bind' failed at > > > service.c:1558 with error: Success > > > 74 Feb 03 16:00:25-216358 revocation-22643 ERROR Could not bind to any > > > of the ports I was supposed to, refusing to run! > > > 75 Feb 03 16:00:25-216345 arm-22628 WARNING Service `gns' terminated > > > with status exit/255, will restart in 1 ms > > > 76 Feb 03 16:00:25-216747 arm-22628 WARNING Service `revocation' > > > terminated with status exit/255, will restart in 2 ms > > > 77 Feb 03 16:00:25-219790 nse-22644 ERROR `mkdir' failed on file > > > `/tmp/gnunet-system-runtime//gnunet-service-nse.sock' at service.c:1140 > > > with error: Permission denied > > > 78 Feb 03 16:00:25-219925 util-service-22644 ERROR `bind' failed at > > > service.c:1405 with error: Permission denied > > > 79 Feb 03 16:00:25-219951 nse-22644 ERROR `bind' failed at > > > service.c:1558 with error: Success > > > 80 Feb 03 16:00:25-219977 nse-22644 ERROR Could not bind to any of the > > > ports I was supposed to, refusing to run! > > > 81 Feb 03 16:00:25-220458 arm-22628 WARNING Service `nse' terminated > > > with status exit/255, will restart in 8 ms > > > 82 Feb 03 16:00:25-222676 gns-22645 ERROR `mkdir' failed on file > > > `/tmp/gnunet-system-runtime//gnunet-service-gns.sock' at service.c:1140 > > > with error: Permission denied > > > 83 Feb 03 16:00:25-222770 util-service-22645 ERROR `bind' failed at > > > service.c:1405 with error: Permission denied > > > 84 Feb 03 16:00:25-222786 gns-22645 ERROR `bind' failed at > > > service.c:1558 with error: Success > > > 85 Feb 03 16:00:25-222795 gns-22645 ERROR Could not bind to any of the > > > ports I was supposed to, refusing to run! > > > 86 Feb 03 16:00:25-222919 revocation-22646 ERROR `mkdir' failed on file > > > `/tmp/gnunet-system-runtime//gnunet-service-revocation.sock' at > > > service.c:1140 with error: Permission denied > > > 87 Feb 03 16:00:25-223009 util-service-22646 ERROR `bind' failed at > > > service.c:1405 with error: Permission denied > > > 88 Feb 03 16:00:25-223025 revocation-22646 ERROR `bind' failed at > > > service.c:1558 with error: Success > > > > > > <snip> > > > > > > On Sun, Feb 2, 2020 at 10:55 PM Schanzenbach, Martin > > > <[email protected]> wrote: > > > Hi, > > > > > > it seems like your services fail to start. Can you post the output of > > > your logfile(s)? > > > (~/.cache/gnunet/) > > > > > > You may also open a bugreport on mantis if you want to attach files. > > > Or you just copy relevant parts here. > > > > > > BR > > > Martin > > > > > > > On 1. Feb 2020, at 21:37, Vikas Maurya <[email protected]> wrote: > > > > > > > > Hi, > > > > I have recently installed gnunet(trying for the first time) and was > > > > trying single-user setup. > > > > but after installation when I run gnunet-arm -s and gnunet-arm -I , I > > > > see that most of the services are being stopped and when I run > > > > gnunet-peerinfo -s, I do not see any output. also gnunet-peerinfo-gtk > > > > does not display any information. > > > > > > > > > > > > <snip> > > > > $gnunet-arm -s > > > > $gnunet-arm -I > > > > Services (excluding stopped services): > > > > (started: 4 / failed: 6 / stopped: 30) > > > > fs (binary='gnunet-service-fs', status=failed, exit_status=255, > > > > restart_delay='6 m') > > > > revocation (binary='gnunet-service-revocation', status=failed, > > > > exit_status=255, restart_delay='6 m') > > > > namestore (binary='gnunet-service-namestore', status=started) > > > > gns (binary='gnunet-service-gns', status=failed, exit_status=255, > > > > restart_delay='6 m') > > > > dht (binary='gnunet-service-dht', status=failed, exit_status=255, > > > > restart_delay='6 m') > > > > cadet (binary='gnunet-service-cadet', status=failed, exit_status=255, > > > > restart_delay='6 m') > > > > zonemaster (binary='gnunet-service-zonemaster', status=started) > > > > zonemaster-monitor (binary='gnunet-service-zonemaster-monitor', > > > > status=started) > > > > nse (binary='gnunet-service-nse', status=failed, exit_status=255, > > > > restart_delay='6 m') > > > > topology (binary='gnunet-daemon-topology', status=started) > > > > > > > > <snip> > > > > > > > > can you please help me in identifying what I could have done wrong > > > > here. > > > > > > > > Thanks, > > > > Vikas > > > > > >
