My questions is pertaining to the control of a PXE device by using the "pxe -info" to help determine client ip, server ip and gateway information. I've compiled and successfully installed GRUB2 1.98 and the PXE configuration is working properly.
My "grub2pxe" image was created by the following command and loads the "pxe" and "pxecmd" modules: grub-mkimage -output=core.imt -prefix="(pxe)/boot/grub" pxe pxecmd cat pxeboot.img core.img > grub2pxe During the startup sequence I've been press "c" to drop me to the grub prompt. From the grub prompt I ran the "lsmod" to ensure that the pxe and pxecmd modules were loaded. When I run the following command "pxe --info" I get the following error: error: unknown command 'pxe'. I'm not sure why the "pxe" command is not found since it's been loaded "pxe.mod". I ran the "strings" command on the pxe.mod and that's where the "net_pxe_ip" lives. Any help on why the pxe command is not found under the grub prompt would be greatly appreciated. Thanks, John Johnson Lockheed Martin Manassas, VA
_______________________________________________ Help-grub mailing list [email protected] http://lists.gnu.org/mailman/listinfo/help-grub
