John and others,
My configuration is different from yours but similar.
I have a 3 hard disk system
One drive is 60% for backup, 40% for Fedora
One drive 190gigs is split with Windows 7 and Windows XP
The third drive was for Debian.
Here is a nasty. All drives are SATA.
With a debian boot dvd, the drives appear in one sequence (sda, sdb, sdc for
the 3 hard disks)
With Fedora boot dvd, the drives appear in another sequence (sda, sdb, sdc, but
different hard disks than for Debian).
All the installers are short on words about what they mean or want to do.
Today I have to rebuild the XP and W7 drive, since sda changed.
One installer uses the physical hard drive sequence as plugged into the mother
board.
One installer uses the logical sequence as I chose for the order that I wanted.
There is an excellent gui program called gparted. It shows you the partitions
and what you have.
It would be wonderful, if that kind of gui representation for the installer was
a clickable gui,
to allow me to specify where I want the "lvm partition", where I want the "boot
to be installed" and where I want the
swap partition to be installed, or shared. (I do not run Fedora if I run
Debian).
Then as you, Debian has grub, its installed clobbered Windows, and I have the
similar problem
Grub2 should know and be able to convert grub configuration files.
Debian Squeeze is not for software developers. Last night, I dropped it
completely and
installed Mint 12. I have the 4 desktops, grub2, and I hope today, with some
tweaking
to have it and Fedora in a common boot menu. Again, I fear that we may be
facing
different grub2 versions. (yes, there are differences and some keywords are not
recognized in one
that are in the other).
I develop software and need multiple versions, without the VM concept.
------------------
Regards
Leslie
Mr. Leslie Satenstein
50 years in IT and going strong.
Yesterday was a good day, today is a better day,
and tomorrow will be even better.
mailto:[email protected]
alternative: [email protected]
www.itbms.biz
>________________________________
> From: John Smith <[email protected]>
>To: [email protected]
>Sent: Saturday, December 10, 2011 7:12 PM
>Subject: Re: How to chainload Grub2 from grub using Debian?
>
>
>
>@Debian:~$ dpkg -l | grep grub
>ii
grub
0.97-64
GRand Unified Bootloader (dummy package)
>ii
grub-common
1.98+20100804-14+squeeze1 GRand
Unified Bootloader, version 2 (common files)
>ii
grub-pc
1.98+20100804-14+squeeze1 GRand
Unified Bootloader, version 2 (PC/BIOS version)
>
>Grub2 is apparently installed. I intend to apt-get purge grub-common
and grub-pc and then apt-get install the
>packages again. Unless someone tells me not to do this.
>
>I understand that the installation scripts should then give me the option
to chainload grub2.
>
>I am somewhat concerned that grub is now a dummy package. Is it
possible that if I purge grub I will not be
>able to reboot?
>From: jackie sparks
>Sent: Thursday, December 08, 2011 7:21 PM
>To: [email protected] ; [email protected]
>Subject: RE: How to chainload Grub2 from grub using
Debian?
>
>dist-upgraded -
sounds more or less like it didn't install the new grub and grub config at all.
You might try loading the system in rescue mode and doing the install the
packages manually.
>
>I think the chain loading might have been
referring to noticing the NTFS partition and wanting to know if you wanted to
include "chain loading" to windows.
>
>These are all assumptions I an in no
way a expert. Sounds interesting though. I'd like to read the solution.
>
>Does the location of the grub.cfg and grub files change from being
stored in the /boot/grub directory between grub and grub 1.99?
>
>
>________________________________
> From: [email protected]
>To: [email protected]
>Subject: How to
chainload Grub2 from grub using Debian?
>Date: Thu, 8 Dec 2011 19:12:28
-0600
>
>
>I have a dual boot computer with Vista on one disk
and Debian on the other.
>
>I recently dist-upgraded from Lenny to Squeeze. The
configuration
>script asked if I wanted to chainload grub and I
chose not to chainload.
>Now I see that it was a mistake to choose not to
chainload because
>legacy grub only has the older kernels in the menu
and now the system
>is not really working properly.
>
>So how do I set up the system as if I chose to
chainload when I dist-upgraded to
Squeeze?
>_______________________________________________
Help-grub mailing list [email protected]
https://lists.gnu.org/mailman/listinfo/help-grub
>_______________________________________________
>Help-grub mailing list
>[email protected]
>https://lists.gnu.org/mailman/listinfo/help-grub
>
>
>
_______________________________________________
Help-grub mailing list
[email protected]
https://lists.gnu.org/mailman/listinfo/help-grub
