On 13.12.2011 21:12, Jordan Uggla wrote:
On Tue, Dec 13, 2011 at 10:18 AM, Oliver Friedrich<[email protected]>  wrote:
beowulf@seashell:~$ sudo LANG=C parted -l
Model: Generic STORAGE DEVICE (scsi)
Disk /dev/sdb: 32.1GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos

Number  Start   End     Size    Type     File system  Flags
  1      1049kB  32.1GB  32.1GB  primary  fat32

 From that, it doesn't look like you have multiple partition tables,
but you may have stale fat signatures (from previously putting a fat32
filesystem on the whole device, without any partition table) which
grub-install is seeing. When grub-install sees what looks like both a
partition table and a filesystem it can't be sure that it's safe to
embed grub. There is probably a subtler and less destructive way to
remove just the fat signatures, but if you don't mind losing the data
currently on the drive then running "dd if=/dev/zero of=/dev/sdb bs=1M
count=1" will zero the first MiB of the drive, *destroying the current
partition table and making all files on the drive currently
inaccessible*. After zeroing the first MiB of the drive you should be
able to partition it again and install grub without any problem.

Did follow your proposal with:

dd if=/dev/zero of=/dev/sdb bs=1M
count=1


and then made the filesystem directly on the device with:

/mkfs.msdos -I -F 32 -n BeowulfOF /dev/sdb/


Anyway, the error message is still the same if I try to install grub with:

/grub-install --force --no-floppy --boot-directory=/media/BeowulfOF/boot 
/dev/sdc/


I'm sorry, I can only provide the german error-message:

//usr/sbin/grub-probe: Fehler: cannot stat `/dev/sdc'./

/root@seashell:/media/Unencrypted/stick# grub-install --force --no-floppy 
--boot-directory=/media/BeowulfOF/boot /dev/sdb/

//usr/sbin/grub-setup: Warnung: Es wird versucht, GRUB auf einer nicht 
partitionierten Platte oder in eine Partition zu installieren. Das ist eine 
SCHLECHTE Idee../

//usr/sbin/grub-setup: Warnung: Einbettung ist nicht möglich. GRUB kann in 
dieser Konfiguration nur mittels Blocklisten installiert werden. Blocklisten 
sind allerdings UNZUVERLÄSSIG und deren Verwendung wird daher nicht empfohlen..


/


_______________________________________________
Help-grub mailing list
[email protected]
https://lists.gnu.org/mailman/listinfo/help-grub

Reply via email to