On Tue, 26 Mar 2013 12:07:59 -0700, Jordan Uggla wrote:
<snip> > Please re-run grub-install (without --modules) and > note down the exact command you ran, as well as the output of "mount" > when you ran grub-install, and post both. If after that grub-install > command you're still not able to boot, please run boot info script > http://bootinfoscript.sourceforge.net/ from a LiveCD/USB or other > working GNU/Linux installation and post the RESULTS.txt that it > produces. Here is the RESULTS.txt Beware - it is long! Boot Info Script 0.61 [1 April 2012] ============================= Boot Info Summary: =============================== => Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 of the same hard drive for core.img. core.img is at this location and uses an embedded config file: --------------------------------------------------------------------------- search.fs_uuid 28ba1903-0731-40e2-8ce2-55e5597293c2 root set prefix=($root)/grub --------------------------------------------------------------------------- -----. => Grub2 (v1.99) is installed in the MBR of /dev/sdb and looks at sector 1 of the same hard drive for core.img. core.img is at this location and looks for (,msdos6)/boot/grub on this drive. => No boot loader is installed in the MBR of /dev/sdc. sda1: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: /bootmgr /Boot/BCD sda2: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Windows 7 Boot files: /Windows/System32/winload.exe sdb1: __________________________________________________________________________ File system: ext4 Boot sector type: - Boot sector info: Operating System: Ubuntu 12.04.2 LTS Boot files: /boot/grub/grub.cfg /etc/fstab /boot/extlinux/extlinux.conf /boot/grub/core.img sdb2: __________________________________________________________________________ File system: swap Boot sector type: - Boot sector info: sdb3: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: sdc1: __________________________________________________________________________ File system: Boot sector type: Unknown Boot sector info: Mounting failed: mount: unknown filesystem type '' sdc2: __________________________________________________________________________ File system: ext4 Boot sector type: - Boot sector info: Operating System: Ubuntu 12.04.1 LTS Boot files: /boot/grub/grub.cfg /etc/fstab /boot/extlinux/extlinux.conf /grub/core.img /boot/grub/core.img sdc3: __________________________________________________________________________ File system: swap Boot sector type: - Boot sector info: sdc4: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: According to the info in the boot sector, sdc4 starts at sector 156555264. But according to the info from fdisk, sdc4 starts at sector 157960192. Operating System: Boot files: ============================ Drive/Partition Info: ============================= Drive: sda _____________________________________________________________________ Disk /dev/sda: 64.0 GB, 64023257088 bytes 255 heads, 63 sectors/track, 7783 cylinders, total 125045424 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sda1 2,048 206,847 204,800 7 NTFS / exFAT / HPFS /dev/sda2 * 206,848 125,040,639 124,833,792 7 NTFS / exFAT / HPFS Drive: sdb _____________________________________________________________________ Disk /dev/sdb: 750.2 GB, 750156374016 bytes 255 heads, 63 sectors/track, 91201 cylinders, total 1465149168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sdb1 2,048 125,304,831 125,302,784 83 Linux /dev/sdb2 125,304,832 156,555,263 31,250,432 82 Linux swap / Solaris /dev/sdb3 156,555,264 1,465,143,295 1,308,588,032 7 NTFS / exFAT / HPFS Drive: sdc _____________________________________________________________________ Disk /dev/sdc: 3000.6 GB, 3000592982016 bytes 255 heads, 63 sectors/track, 364801 cylinders, total 5860533168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sdc1 1 4,294,967,295 4,294,967,295 ee GPT GUID Partition Table detected. Partition Start Sector End Sector # of Sectors System /dev/sdc1 34 262,177 262,144 Microsoft Reserved Partition (Windows) /dev/sdc2 264,192 126,216,191 125,952,000 Data partition (Windows/Linux) /dev/sdc3 126,216,192 157,960,191 31,744,000 Swap partition (Linux) /dev/sdc4 157,960,192 1,530,120,191 1,372,160,000 Data partition (Windows/Linux) "blkid" output: ________________________________________________________________ Device UUID TYPE LABEL /dev/loop0 squashfs /dev/sda1 E4E8A488E8A45B16 ntfs System Reserved /dev/sda2 8AE0BD40E0BD3375 ntfs Windows 7 /dev/sdb1 28ba1903-0731-40e2-8ce2-55e5597293c2 ext4 /dev/sdb2 5a8f1ee7-b300-4b6e-9da3-c996132a5a20 swap /dev/sdb3 EAF86ACEF86A9899 ntfs Shared Storage /dev/sdc2 28ba1903-0731-40e2-8ce2-55e5597293c2 ext4 /dev/sdc3 d133ebc0-14c9-49b2-8408-e55771115326 swap /dev/sdc4 EAF86ACEF86A9899 ntfs Shared Storage /dev/sr0 iso9660 Ubuntu 12.04.1 LTS amd64 ================================ Mount points: ================================= Device Mount_Point Type Options /dev/loop0 /rofs squashfs (ro,noatime) /dev/sdb3 /mnt/dwer fuseblk (rw,nosuid,nodev,allow_other,blksize=4096) /dev/sdc2 /mnt/sdc2 ext4 (rw) /dev/sr0 /cdrom iso9660 (ro,noatime) =========================== sdb1/boot/grub/grub.cfg: =========================== -------------------------------------------------------------------------------- # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi set default="0" if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { insmod vbe insmod vga insmod video_bochs insmod video_cirrus } insmod part_msdos insmod ext2 set root='(hd1,msdos1)' search --no-floppy --fs-uuid --set=root 28ba1903-0731-40e2-8ce2-55e5597293c2 if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=auto load_video insmod gfxterm insmod part_msdos insmod ext2 set root='(hd1,msdos1)' search --no-floppy --fs-uuid --set=root 28ba1903-0731-40e2-8ce2-55e5597293c2 set locale_dir=($root)/boot/grub/locale set lang=en_GB insmod gettext fi terminal_output gfxterm if [ "${recordfail}" = 1 ]; then set timeout=-1 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray if background_color 44,0,30; then clear fi ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/08_os-prober ### menuentry "Windows 7 (loader) (on /dev/sda1)" --class windows --class os { insmod part_msdos insmod ntfs set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set=root E4E8A488E8A45B16 chainloader +1 } ### END /etc/grub.d/08_os-prober ### ### BEGIN /etc/grub.d/10_linux ### function gfxmode { set gfxpayload="${1}" if [ "${1}" = "keep" ]; then set vt_handoff=vt.handoff=7 else set vt_handoff= fi } if [ "${recordfail}" != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode if [ "${linux_gfx_mode}" != "text" ]; then load_video; fi menuentry 'Ubuntu, with Linux 3.2.0-39-generic' --class ubuntu --class gnu- linux --class gnu --class os { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='(hd1,msdos1)' search --no-floppy --fs-uuid --set=root 28ba1903-0731-40e2-8ce2-55e5597293c2 linux /boot/vmlinuz-3.2.0-39-generic root=UUID=28ba1903-0731-40e2-8ce2-55e5597293c2 ro quiet splash $vt_handoff initrd /boot/initrd.img-3.2.0-39-generic } menuentry 'Ubuntu, with Linux 3.2.0-39-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod part_msdos insmod ext2 set root='(hd1,msdos1)' search --no-floppy --fs-uuid --set=root 28ba1903-0731-40e2-8ce2-55e5597293c2 echo 'Loading Linux 3.2.0-39-generic ...' linux /boot/vmlinuz-3.2.0-39-generic root=UUID=28ba1903-0731-40e2-8ce2-55e5597293c2 ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.2.0-39-generic } submenu "Previous Linux versions" { menuentry 'Ubuntu, with Linux 3.2.0-38-generic' --class ubuntu --class gnu- linux --class gnu --class os { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='(hd1,msdos1)' search --no-floppy --fs-uuid --set=root 28ba1903-0731-40e2-8ce2-55e5597293c2 linux /boot/vmlinuz-3.2.0-38-generic root=UUID=28ba1903-0731-40e2-8ce2-55e5597293c2 ro quiet splash $vt_handoff initrd /boot/initrd.img-3.2.0-38-generic } menuentry 'Ubuntu, with Linux 3.2.0-38-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod part_msdos insmod ext2 set root='(hd1,msdos1)' search --no-floppy --fs-uuid --set=root 28ba1903-0731-40e2-8ce2-55e5597293c2 echo 'Loading Linux 3.2.0-38-generic ...' linux /boot/vmlinuz-3.2.0-38-generic root=UUID=28ba1903-0731-40e2-8ce2-55e5597293c2 ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.2.0-38-generic } menuentry 'Ubuntu, with Linux 3.2.0-37-generic' --class ubuntu --class gnu- linux --class gnu --class os { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='(hd1,msdos1)' search --no-floppy --fs-uuid --set=root 28ba1903-0731-40e2-8ce2-55e5597293c2 linux /boot/vmlinuz-3.2.0-37-generic root=UUID=28ba1903-0731-40e2-8ce2-55e5597293c2 ro quiet splash $vt_handoff initrd /boot/initrd.img-3.2.0-37-generic } menuentry 'Ubuntu, with Linux 3.2.0-37-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod part_msdos insmod ext2 set root='(hd1,msdos1)' search --no-floppy --fs-uuid --set=root 28ba1903-0731-40e2-8ce2-55e5597293c2 echo 'Loading Linux 3.2.0-37-generic ...' linux /boot/vmlinuz-3.2.0-37-generic root=UUID=28ba1903-0731-40e2-8ce2-55e5597293c2 ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.2.0-37-generic } menuentry 'Ubuntu, with Linux 3.2.0-35-generic' --class ubuntu --class gnu- linux --class gnu --class os { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='(hd1,msdos1)' search --no-floppy --fs-uuid --set=root 28ba1903-0731-40e2-8ce2-55e5597293c2 linux /boot/vmlinuz-3.2.0-35-generic root=UUID=28ba1903-0731-40e2-8ce2-55e5597293c2 ro quiet splash $vt_handoff initrd /boot/initrd.img-3.2.0-35-generic } menuentry 'Ubuntu, with Linux 3.2.0-35-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod part_msdos insmod ext2 set root='(hd1,msdos1)' search --no-floppy --fs-uuid --set=root 28ba1903-0731-40e2-8ce2-55e5597293c2 echo 'Loading Linux 3.2.0-35-generic ...' linux /boot/vmlinuz-3.2.0-35-generic root=UUID=28ba1903-0731-40e2-8ce2-55e5597293c2 ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.2.0-35-generic } menuentry 'Ubuntu, with Linux 3.2.0-29-generic' --class ubuntu --class gnu- linux --class gnu --class os { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='(hd1,msdos1)' search --no-floppy --fs-uuid --set=root 28ba1903-0731-40e2-8ce2-55e5597293c2 linux /boot/vmlinuz-3.2.0-29-generic root=UUID=28ba1903-0731-40e2-8ce2-55e5597293c2 ro quiet splash $vt_handoff initrd /boot/initrd.img-3.2.0-29-generic } menuentry 'Ubuntu, with Linux 3.2.0-29-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod part_msdos insmod ext2 set root='(hd1,msdos1)' search --no-floppy --fs-uuid --set=root 28ba1903-0731-40e2-8ce2-55e5597293c2 echo 'Loading Linux 3.2.0-29-generic ...' linux /boot/vmlinuz-3.2.0-29-generic root=UUID=28ba1903-0731-40e2-8ce2-55e5597293c2 ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.2.0-29-generic } menuentry 'Ubuntu, with Linux 3.2.0-27-generic' --class ubuntu --class gnu- linux --class gnu --class os { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='(hd1,msdos1)' search --no-floppy --fs-uuid --set=root 28ba1903-0731-40e2-8ce2-55e5597293c2 linux /boot/vmlinuz-3.2.0-27-generic root=UUID=28ba1903-0731-40e2-8ce2-55e5597293c2 ro quiet splash $vt_handoff initrd /boot/initrd.img-3.2.0-27-generic } menuentry 'Ubuntu, with Linux 3.2.0-27-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod part_msdos insmod ext2 set root='(hd1,msdos1)' search --no-floppy --fs-uuid --set=root 28ba1903-0731-40e2-8ce2-55e5597293c2 echo 'Loading Linux 3.2.0-27-generic ...' linux /boot/vmlinuz-3.2.0-27-generic root=UUID=28ba1903-0731-40e2-8ce2-55e5597293c2 ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.2.0-27-generic } menuentry 'Ubuntu, with Linux 3.2.0-24-generic' --class ubuntu --class gnu- linux --class gnu --class os { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='(hd1,msdos1)' search --no-floppy --fs-uuid --set=root 28ba1903-0731-40e2-8ce2-55e5597293c2 linux /boot/vmlinuz-3.2.0-24-generic root=UUID=28ba1903-0731-40e2-8ce2-55e5597293c2 ro quiet splash $vt_handoff initrd /boot/initrd.img-3.2.0-24-generic } menuentry 'Ubuntu, with Linux 3.2.0-24-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod part_msdos insmod ext2 set root='(hd1,msdos1)' search --no-floppy --fs-uuid --set=root 28ba1903-0731-40e2-8ce2-55e5597293c2 echo 'Loading Linux 3.2.0-24-generic ...' linux /boot/vmlinuz-3.2.0-24-generic root=UUID=28ba1903-0731-40e2-8ce2-55e5597293c2 ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.2.0-24-generic } menuentry 'Ubuntu, with Linux 3.0.0-17-generic' --class ubuntu --class gnu- linux --class gnu --class os { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='(hd1,msdos1)' search --no-floppy --fs-uuid --set=root 28ba1903-0731-40e2-8ce2-55e5597293c2 linux /boot/vmlinuz-3.0.0-17-generic root=UUID=28ba1903-0731-40e2-8ce2-55e5597293c2 ro quiet splash $vt_handoff initrd /boot/initrd.img-3.0.0-17-generic } menuentry 'Ubuntu, with Linux 3.0.0-17-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod part_msdos insmod ext2 set root='(hd1,msdos1)' search --no-floppy --fs-uuid --set=root 28ba1903-0731-40e2-8ce2-55e5597293c2 echo 'Loading Linux 3.0.0-17-generic ...' linux /boot/vmlinuz-3.0.0-17-generic root=UUID=28ba1903-0731-40e2-8ce2-55e5597293c2 ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.0.0-17-generic } menuentry 'Ubuntu, with Linux 3.0.0-16-generic' --class ubuntu --class gnu- linux --class gnu --class os { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='(hd1,msdos1)' search --no-floppy --fs-uuid --set=root 28ba1903-0731-40e2-8ce2-55e5597293c2 linux /boot/vmlinuz-3.0.0-16-generic root=UUID=28ba1903-0731-40e2-8ce2-55e5597293c2 ro quiet splash $vt_handoff initrd /boot/initrd.img-3.0.0-16-generic } menuentry 'Ubuntu, with Linux 3.0.0-16-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod part_msdos insmod ext2 set root='(hd1,msdos1)' search --no-floppy --fs-uuid --set=root 28ba1903-0731-40e2-8ce2-55e5597293c2 echo 'Loading Linux 3.0.0-16-generic ...' linux /boot/vmlinuz-3.0.0-16-generic root=UUID=28ba1903-0731-40e2-8ce2-55e5597293c2 ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.0.0-16-generic } menuentry 'Ubuntu, with Linux 3.0.0-15-generic' --class ubuntu --class gnu- linux --class gnu --class os { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='(hd1,msdos1)' search --no-floppy --fs-uuid --set=root 28ba1903-0731-40e2-8ce2-55e5597293c2 linux /boot/vmlinuz-3.0.0-15-generic root=UUID=28ba1903-0731-40e2-8ce2-55e5597293c2 ro quiet splash $vt_handoff initrd /boot/initrd.img-3.0.0-15-generic } menuentry 'Ubuntu, with Linux 3.0.0-15-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod part_msdos insmod ext2 set root='(hd1,msdos1)' search --no-floppy --fs-uuid --set=root 28ba1903-0731-40e2-8ce2-55e5597293c2 echo 'Loading Linux 3.0.0-15-generic ...' linux /boot/vmlinuz-3.0.0-15-generic root=UUID=28ba1903-0731-40e2-8ce2-55e5597293c2 ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.0.0-15-generic } menuentry 'Ubuntu, with Linux 3.0.0-14-generic' --class ubuntu --class gnu- linux --class gnu --class os { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='(hd1,msdos1)' search --no-floppy --fs-uuid --set=root 28ba1903-0731-40e2-8ce2-55e5597293c2 linux /boot/vmlinuz-3.0.0-14-generic root=UUID=28ba1903-0731-40e2-8ce2-55e5597293c2 ro quiet splash $vt_handoff initrd /boot/initrd.img-3.0.0-14-generic } menuentry 'Ubuntu, with Linux 3.0.0-14-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod part_msdos insmod ext2 set root='(hd1,msdos1)' search --no-floppy --fs-uuid --set=root 28ba1903-0731-40e2-8ce2-55e5597293c2 echo 'Loading Linux 3.0.0-14-generic ...' linux /boot/vmlinuz-3.0.0-14-generic root=UUID=28ba1903-0731-40e2-8ce2-55e5597293c2 ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.0.0-14-generic } menuentry 'Ubuntu, with Linux 3.0.0-12-generic' --class ubuntu --class gnu- linux --class gnu --class os { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='(hd1,msdos1)' search --no-floppy --fs-uuid --set=root 28ba1903-0731-40e2-8ce2-55e5597293c2 linux /boot/vmlinuz-3.0.0-12-generic root=UUID=28ba1903-0731-40e2-8ce2-55e5597293c2 ro quiet splash $vt_handoff initrd /boot/initrd.img-3.0.0-12-generic } menuentry 'Ubuntu, with Linux 3.0.0-12-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod part_msdos insmod ext2 set root='(hd1,msdos1)' search --no-floppy --fs-uuid --set=root 28ba1903-0731-40e2-8ce2-55e5597293c2 echo 'Loading Linux 3.0.0-12-generic ...' linux /boot/vmlinuz-3.0.0-12-generic root=UUID=28ba1903-0731-40e2-8ce2-55e5597293c2 ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.0.0-12-generic } } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod part_msdos insmod ext2 set root='(hd1,msdos1)' search --no-floppy --fs-uuid --set=root 28ba1903-0731-40e2-8ce2-55e5597293c2 linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod part_msdos insmod ext2 set root='(hd1,msdos1)' search --no-floppy --fs-uuid --set=root 28ba1903-0731-40e2-8ce2-55e5597293c2 linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_uefi-firmware ### ### END /etc/grub.d/30_uefi-firmware ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### -------------------------------------------------------------------------------- =============================== sdb1/etc/fstab: ================================ -------------------------------------------------------------------------------- # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sdb1 during installation UUID=28ba1903-0731-40e2-8ce2-55e5597293c2 / ext4 errors=remount-ro 0 1 # swap was on /dev/sdb2 during installation UUID=5a8f1ee7-b300-4b6e-9da3-c996132a5a20 none swap sw 0 0 -------------------------------------------------------------------------------- ====================== sdb1/boot/extlinux/extlinux.conf: ======================= -------------------------------------------------------------------------------- ## /boot/extlinux/extlinux.conf ## ## IMPORTANT WARNING ## ## The configuration of this file is generated automatically. ## Do not edit this file manually, use: extlinux-update default l0 prompt 1 timeout 50 include themes/debian/theme.cfg -------------------------------------------------------------------------------- =================== sdb1: Location of files loaded by Grub: ==================== GiB - GB File Fragment(s) = boot/grub/ core.img 1 = boot/grub/ grub.cfg 1 = boot/initrd.img-3.0.0-12- generic 2 = boot/initrd.img-3.0.0-14- generic 10 = boot/initrd.img-3.0.0-15- generic 2 = boot/initrd.img-3.0.0-16- generic 2 = boot/initrd.img-3.0.0-17- generic 9 = boot/initrd.img-3.2.0-24- generic 2 = boot/initrd.img-3.2.0-27- generic 2 = boot/initrd.img-3.2.0-29- generic 2 = boot/initrd.img-3.2.0-35- generic 2 = boot/initrd.img-3.2.0-37- generic 2 = boot/initrd.img-3.2.0-38- generic 2 = boot/initrd.img-3.2.0-39- generic 2 = boot/vmlinuz-3.0.0-12- generic 1 = boot/vmlinuz-3.0.0-14- generic 1 = boot/vmlinuz-3.0.0-15- generic 1 = boot/vmlinuz-3.0.0-16- generic 1 = boot/vmlinuz-3.0.0-17- generic 2 = boot/vmlinuz-3.2.0-24- generic 1 = boot/vmlinuz-3.2.0-27- generic 1 = boot/vmlinuz-3.2.0-29- generic 1 = boot/vmlinuz-3.2.0-35- generic 2 = boot/vmlinuz-3.2.0-37- generic 2 = boot/vmlinuz-3.2.0-38- generic 1 = boot/vmlinuz-3.2.0-39- generic 1 = vmlinuz 1 = vmlinuz.old 1 ================= sdb1: Location of files loaded by Syslinux: ================== GiB - GB File Fragment(s) = boot/extlinux/ chain.c32 1 = boot/extlinux/ extlinux.conf 1 ============== sdb1: Version of COM32(R) files used by Syslinux: =============== boot/extlinux/chain.c32 : COM32R module (v4.xx) =========================== sdc2/boot/grub/grub.cfg: =========================== -------------------------------------------------------------------------------- # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi set default="0" if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { insmod vbe insmod vga insmod video_bochs insmod video_cirrus } insmod part_gpt insmod ext2 set root='(hd1,gpt2)' search --no-floppy --fs-uuid --set=root 28ba1903-0731-40e2-8ce2-55e5597293c2 if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=auto load_video insmod gfxterm insmod part_gpt insmod ext2 set root='(hd1,gpt2)' search --no-floppy --fs-uuid --set=root 28ba1903-0731-40e2-8ce2-55e5597293c2 set locale_dir=($root)/boot/grub/locale set lang=en_GB insmod gettext fi terminal_output gfxterm if [ "${recordfail}" = 1 ]; then set timeout=-1 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray if background_color 44,0,30; then clear fi ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### function gfxmode { set gfxpayload="${1}" if [ "${1}" = "keep" ]; then set vt_handoff=vt.handoff=7 else set vt_handoff= fi } if [ "${recordfail}" != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode if [ "${linux_gfx_mode}" != "text" ]; then load_video; fi menuentry 'Ubuntu, with Linux 3.2.0-39-generic' --class ubuntu --class gnu- linux --class gnu --class os { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_gpt insmod ext2 set root='(hd1,gpt2)' search --no-floppy --fs-uuid --set=root 28ba1903-0731-40e2-8ce2-55e5597293c2 linux /boot/vmlinuz-3.2.0-39-generic root=UUID=28ba1903-0731-40e2-8ce2-55e5597293c2 ro quiet splash $vt_handoff initrd /boot/initrd.img-3.2.0-39-generic } menuentry 'Ubuntu, with Linux 3.2.0-39-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod part_gpt insmod ext2 set root='(hd1,gpt2)' search --no-floppy --fs-uuid --set=root 28ba1903-0731-40e2-8ce2-55e5597293c2 echo 'Loading Linux 3.2.0-39-generic ...' linux /boot/vmlinuz-3.2.0-39-generic root=UUID=28ba1903-0731-40e2-8ce2-55e5597293c2 ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.2.0-39-generic } submenu "Previous Linux versions" { menuentry 'Ubuntu, with Linux 3.2.0-38-generic' --class ubuntu --class gnu- linux --class gnu --class os { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_gpt insmod ext2 set root='(hd1,gpt2)' search --no-floppy --fs-uuid --set=root 28ba1903-0731-40e2-8ce2-55e5597293c2 linux /boot/vmlinuz-3.2.0-38-generic root=UUID=28ba1903-0731-40e2-8ce2-55e5597293c2 ro quiet splash $vt_handoff initrd /boot/initrd.img-3.2.0-38-generic } menuentry 'Ubuntu, with Linux 3.2.0-38-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod part_gpt insmod ext2 set root='(hd1,gpt2)' search --no-floppy --fs-uuid --set=root 28ba1903-0731-40e2-8ce2-55e5597293c2 echo 'Loading Linux 3.2.0-38-generic ...' linux /boot/vmlinuz-3.2.0-38-generic root=UUID=28ba1903-0731-40e2-8ce2-55e5597293c2 ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.2.0-38-generic } menuentry 'Ubuntu, with Linux 3.2.0-37-generic' --class ubuntu --class gnu- linux --class gnu --class os { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_gpt insmod ext2 set root='(hd1,gpt2)' search --no-floppy --fs-uuid --set=root 28ba1903-0731-40e2-8ce2-55e5597293c2 linux /boot/vmlinuz-3.2.0-37-generic root=UUID=28ba1903-0731-40e2-8ce2-55e5597293c2 ro quiet splash $vt_handoff initrd /boot/initrd.img-3.2.0-37-generic } menuentry 'Ubuntu, with Linux 3.2.0-37-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod part_gpt insmod ext2 set root='(hd1,gpt2)' search --no-floppy --fs-uuid --set=root 28ba1903-0731-40e2-8ce2-55e5597293c2 echo 'Loading Linux 3.2.0-37-generic ...' linux /boot/vmlinuz-3.2.0-37-generic root=UUID=28ba1903-0731-40e2-8ce2-55e5597293c2 ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.2.0-37-generic } menuentry 'Ubuntu, with Linux 3.2.0-35-generic' --class ubuntu --class gnu- linux --class gnu --class os { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_gpt insmod ext2 set root='(hd1,gpt2)' search --no-floppy --fs-uuid --set=root 28ba1903-0731-40e2-8ce2-55e5597293c2 linux /boot/vmlinuz-3.2.0-35-generic root=UUID=28ba1903-0731-40e2-8ce2-55e5597293c2 ro quiet splash $vt_handoff initrd /boot/initrd.img-3.2.0-35-generic } menuentry 'Ubuntu, with Linux 3.2.0-35-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod part_gpt insmod ext2 set root='(hd1,gpt2)' search --no-floppy --fs-uuid --set=root 28ba1903-0731-40e2-8ce2-55e5597293c2 echo 'Loading Linux 3.2.0-35-generic ...' linux /boot/vmlinuz-3.2.0-35-generic root=UUID=28ba1903-0731-40e2-8ce2-55e5597293c2 ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.2.0-35-generic } menuentry 'Ubuntu, with Linux 3.2.0-29-generic' --class ubuntu --class gnu- linux --class gnu --class os { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_gpt insmod ext2 set root='(hd1,gpt2)' search --no-floppy --fs-uuid --set=root 28ba1903-0731-40e2-8ce2-55e5597293c2 linux /boot/vmlinuz-3.2.0-29-generic root=UUID=28ba1903-0731-40e2-8ce2-55e5597293c2 ro quiet splash $vt_handoff initrd /boot/initrd.img-3.2.0-29-generic } menuentry 'Ubuntu, with Linux 3.2.0-29-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod part_gpt insmod ext2 set root='(hd1,gpt2)' search --no-floppy --fs-uuid --set=root 28ba1903-0731-40e2-8ce2-55e5597293c2 echo 'Loading Linux 3.2.0-29-generic ...' linux /boot/vmlinuz-3.2.0-29-generic root=UUID=28ba1903-0731-40e2-8ce2-55e5597293c2 ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.2.0-29-generic } menuentry 'Ubuntu, with Linux 3.2.0-27-generic' --class ubuntu --class gnu- linux --class gnu --class os { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_gpt insmod ext2 set root='(hd1,gpt2)' search --no-floppy --fs-uuid --set=root 28ba1903-0731-40e2-8ce2-55e5597293c2 linux /boot/vmlinuz-3.2.0-27-generic root=UUID=28ba1903-0731-40e2-8ce2-55e5597293c2 ro quiet splash $vt_handoff initrd /boot/initrd.img-3.2.0-27-generic } menuentry 'Ubuntu, with Linux 3.2.0-27-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod part_gpt insmod ext2 set root='(hd1,gpt2)' search --no-floppy --fs-uuid --set=root 28ba1903-0731-40e2-8ce2-55e5597293c2 echo 'Loading Linux 3.2.0-27-generic ...' linux /boot/vmlinuz-3.2.0-27-generic root=UUID=28ba1903-0731-40e2-8ce2-55e5597293c2 ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.2.0-27-generic } menuentry 'Ubuntu, with Linux 3.2.0-24-generic' --class ubuntu --class gnu- linux --class gnu --class os { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_gpt insmod ext2 set root='(hd1,gpt2)' search --no-floppy --fs-uuid --set=root 28ba1903-0731-40e2-8ce2-55e5597293c2 linux /boot/vmlinuz-3.2.0-24-generic root=UUID=28ba1903-0731-40e2-8ce2-55e5597293c2 ro quiet splash $vt_handoff initrd /boot/initrd.img-3.2.0-24-generic } menuentry 'Ubuntu, with Linux 3.2.0-24-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod part_gpt insmod ext2 set root='(hd1,gpt2)' search --no-floppy --fs-uuid --set=root 28ba1903-0731-40e2-8ce2-55e5597293c2 echo 'Loading Linux 3.2.0-24-generic ...' linux /boot/vmlinuz-3.2.0-24-generic root=UUID=28ba1903-0731-40e2-8ce2-55e5597293c2 ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.2.0-24-generic } menuentry 'Ubuntu, with Linux 3.0.0-17-generic' --class ubuntu --class gnu- linux --class gnu --class os { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_gpt insmod ext2 set root='(hd1,gpt2)' search --no-floppy --fs-uuid --set=root 28ba1903-0731-40e2-8ce2-55e5597293c2 linux /boot/vmlinuz-3.0.0-17-generic root=UUID=28ba1903-0731-40e2-8ce2-55e5597293c2 ro quiet splash $vt_handoff initrd /boot/initrd.img-3.0.0-17-generic } menuentry 'Ubuntu, with Linux 3.0.0-17-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod part_gpt insmod ext2 set root='(hd1,gpt2)' search --no-floppy --fs-uuid --set=root 28ba1903-0731-40e2-8ce2-55e5597293c2 echo 'Loading Linux 3.0.0-17-generic ...' linux /boot/vmlinuz-3.0.0-17-generic root=UUID=28ba1903-0731-40e2-8ce2-55e5597293c2 ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.0.0-17-generic } menuentry 'Ubuntu, with Linux 3.0.0-16-generic' --class ubuntu --class gnu- linux --class gnu --class os { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_gpt insmod ext2 set root='(hd1,gpt2)' search --no-floppy --fs-uuid --set=root 28ba1903-0731-40e2-8ce2-55e5597293c2 linux /boot/vmlinuz-3.0.0-16-generic root=UUID=28ba1903-0731-40e2-8ce2-55e5597293c2 ro quiet splash $vt_handoff initrd /boot/initrd.img-3.0.0-16-generic } menuentry 'Ubuntu, with Linux 3.0.0-16-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod part_gpt insmod ext2 set root='(hd1,gpt2)' search --no-floppy --fs-uuid --set=root 28ba1903-0731-40e2-8ce2-55e5597293c2 echo 'Loading Linux 3.0.0-16-generic ...' linux /boot/vmlinuz-3.0.0-16-generic root=UUID=28ba1903-0731-40e2-8ce2-55e5597293c2 ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.0.0-16-generic } menuentry 'Ubuntu, with Linux 3.0.0-15-generic' --class ubuntu --class gnu- linux --class gnu --class os { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_gpt insmod ext2 set root='(hd1,gpt2)' search --no-floppy --fs-uuid --set=root 28ba1903-0731-40e2-8ce2-55e5597293c2 linux /boot/vmlinuz-3.0.0-15-generic root=UUID=28ba1903-0731-40e2-8ce2-55e5597293c2 ro quiet splash $vt_handoff initrd /boot/initrd.img-3.0.0-15-generic } menuentry 'Ubuntu, with Linux 3.0.0-15-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod part_gpt insmod ext2 set root='(hd1,gpt2)' search --no-floppy --fs-uuid --set=root 28ba1903-0731-40e2-8ce2-55e5597293c2 echo 'Loading Linux 3.0.0-15-generic ...' linux /boot/vmlinuz-3.0.0-15-generic root=UUID=28ba1903-0731-40e2-8ce2-55e5597293c2 ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.0.0-15-generic } menuentry 'Ubuntu, with Linux 3.0.0-14-generic' --class ubuntu --class gnu- linux --class gnu --class os { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_gpt insmod ext2 set root='(hd1,gpt2)' search --no-floppy --fs-uuid --set=root 28ba1903-0731-40e2-8ce2-55e5597293c2 linux /boot/vmlinuz-3.0.0-14-generic root=UUID=28ba1903-0731-40e2-8ce2-55e5597293c2 ro quiet splash $vt_handoff initrd /boot/initrd.img-3.0.0-14-generic } menuentry 'Ubuntu, with Linux 3.0.0-14-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod part_gpt insmod ext2 set root='(hd1,gpt2)' search --no-floppy --fs-uuid --set=root 28ba1903-0731-40e2-8ce2-55e5597293c2 echo 'Loading Linux 3.0.0-14-generic ...' linux /boot/vmlinuz-3.0.0-14-generic root=UUID=28ba1903-0731-40e2-8ce2-55e5597293c2 ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.0.0-14-generic } menuentry 'Ubuntu, with Linux 3.0.0-12-generic' --class ubuntu --class gnu- linux --class gnu --class os { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_gpt insmod ext2 set root='(hd1,gpt2)' search --no-floppy --fs-uuid --set=root 28ba1903-0731-40e2-8ce2-55e5597293c2 linux /boot/vmlinuz-3.0.0-12-generic root=UUID=28ba1903-0731-40e2-8ce2-55e5597293c2 ro quiet splash $vt_handoff initrd /boot/initrd.img-3.0.0-12-generic } menuentry 'Ubuntu, with Linux 3.0.0-12-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod part_gpt insmod ext2 set root='(hd1,gpt2)' search --no-floppy --fs-uuid --set=root 28ba1903-0731-40e2-8ce2-55e5597293c2 echo 'Loading Linux 3.0.0-12-generic ...' linux /boot/vmlinuz-3.0.0-12-generic root=UUID=28ba1903-0731-40e2-8ce2-55e5597293c2 ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.0.0-12-generic } } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod part_gpt insmod ext2 set root='(hd1,gpt2)' search --no-floppy --fs-uuid --set=root 28ba1903-0731-40e2-8ce2-55e5597293c2 linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod part_gpt insmod ext2 set root='(hd1,gpt2)' search --no-floppy --fs-uuid --set=root 28ba1903-0731-40e2-8ce2-55e5597293c2 linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### menuentry "Windows 7 (loader) (on /dev/sda1)" --class windows --class os { insmod part_msdos insmod ntfs set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set=root E4E8A488E8A45B16 chainloader +1 } ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### -------------------------------------------------------------------------------- =============================== sdc2/etc/fstab: ================================ -------------------------------------------------------------------------------- # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sdb2 during installation UUID=28ba1903-0731-40e2-8ce2-55e5597293c2 / ext4 errors=remount-ro 0 1 # swap was on /dev/sdb3 during installation UUID=d133ebc0-14c9-49b2-8408-e55771115326 none swap sw 0 0 -------------------------------------------------------------------------------- ====================== sdc2/boot/extlinux/extlinux.conf: ======================= -------------------------------------------------------------------------------- ## /boot/extlinux/extlinux.conf ## ## IMPORTANT WARNING ## ## The configuration of this file is generated automatically. ## Do not edit this file manually, use: extlinux-update default l0 prompt 1 timeout 50 include themes/debian/theme.cfg -------------------------------------------------------------------------------- =================== sdc2: Location of files loaded by Grub: ==================== GiB - GB File Fragment(s) = boot/grub/ core.img 1 = boot/grub/ grub.cfg 1 = boot/initrd.img-3.0.0-12- generic 2 = boot/initrd.img-3.0.0-14- generic 10 = boot/initrd.img-3.0.0-15- generic 2 = boot/initrd.img-3.0.0-16- generic 2 = boot/initrd.img-3.0.0-17- generic 9 = boot/initrd.img-3.2.0-24- generic 2 = boot/initrd.img-3.2.0-27- generic 2 = boot/initrd.img-3.2.0-29- generic 2 = boot/initrd.img-3.2.0-35- generic 2 = boot/initrd.img-3.2.0-37- generic 2 = boot/initrd.img-3.2.0-38- generic 2 = boot/initrd.img-3.2.0-39- generic 2 = boot/vmlinuz-3.0.0-12- generic 1 = boot/vmlinuz-3.0.0-14- generic 1 = boot/vmlinuz-3.0.0-15- generic 1 = boot/vmlinuz-3.0.0-16- generic 1 = boot/vmlinuz-3.0.0-17- generic 2 = boot/vmlinuz-3.2.0-24- generic 1 = boot/vmlinuz-3.2.0-27- generic 1 = boot/vmlinuz-3.2.0-29- generic 1 = boot/vmlinuz-3.2.0-35- generic 2 = boot/vmlinuz-3.2.0-37- generic 2 = boot/vmlinuz-3.2.0-38- generic 1 = boot/vmlinuz-3.2.0-39- generic 1 = grub/ core.img 1 = initrd.img 2 = vmlinuz 1 ================= sdc2: Location of files loaded by Syslinux: ================== GiB - GB File Fragment(s) = boot/extlinux/ chain.c32 1 = boot/extlinux/ extlinux.conf 1 ============== sdc2: Version of COM32(R) files used by Syslinux: =============== boot/extlinux/chain.c32 : COM32R module (v4.xx) ======================== Unknown MBRs/Boot Sectors/etc: ======================== Unknown BootLoader on sdc1 00000000 5b 7d 16 6c 66 41 41 9b bc cc b5 21 ae 3d af be | [}.lfAA....!.=..| 00000010 4a 5d 3a d4 ac fc 27 0e 9f cb f7 f7 f0 af 52 1c | J]:...'.......R.| 00000020 65 5b 47 3a 43 c2 10 9d 0b 84 a5 61 f8 9e 8f da |e [G:C......a....| 00000030 20 23 e8 70 02 ba 6f 6b e8 8f 09 14 e8 77 c7 41 | #.p..ok.....w.A| 00000040 f2 46 7f cd 82 df ac d4 13 ab 40 f6 7c 77 7a 8a |.F........@.| wz.| 00000050 20 c3 48 88 f0 c4 2b 49 f2 de 6a 54 bd 20 05 a7 | .H... +I..jT. ..| 00000060 0c 04 4d fd 2d 3a fc 3f 4d 2f e3 24 5a 1f 97 cb |..M.-:.?M/. $Z...| 00000070 9c 50 93 84 36 94 3e e5 b0 2a ce 51 6c e0 cb 03 |.P..6.>..*.Ql...| 00000080 6d 07 ab 32 43 41 b2 6c d1 b3 c5 6d f7 22 db 5a | m..2CA.l...m.".Z| 00000090 44 9b 86 d0 72 b6 d4 b4 84 c6 39 a8 80 a2 03 08 | D...r.....9.....| 000000a0 3f 57 cc 1a ff 2c 8c 70 f6 f1 cb 17 66 25 05 21 |?W...,.p....f %.!| 000000b0 14 92 89 7a f7 06 af 4e a8 b3 67 d9 31 5f b1 2c |...z...N..g.1_.,| 000000c0 ee 2b 11 08 1f 77 fd 70 1d 12 1e a2 e7 fa eb 22 |. +...w.p......."| 000000d0 d9 ea 40 c6 43 9e 22 be c2 6a bf 91 7e db df bd |[email protected]."..j..~...| 000000e0 f3 80 33 51 94 65 e6 82 d2 37 c3 16 ef 0f 70 c0 |..3Q.e...7....p.| 000000f0 2e 17 47 6e 9a 1b 7d b0 5b 44 79 5f 50 dd 64 45 |..Gn..}. [Dy_P.dE| 00000100 26 6e 6f 79 57 bc e3 2d 2e 7b 53 5f 90 77 26 d0 |&noyW..-. {S_.w&.| 00000110 e3 e9 35 4a 3f ae 51 80 eb b2 18 f1 3a 85 bb 04 |..5J?.Q.....:...| 00000120 8f 16 85 a9 08 3e 24 a1 1d 7c 77 67 f3 96 57 1a |.....>$..| wg..W.| 00000130 55 c9 9e b3 35 8b 6f 73 8d d8 fb f1 96 b7 5d cb | U...5.os......].| 00000140 e7 29 a5 c3 35 cf 17 79 96 cd 57 da d8 64 b7 f4 |.)..5..y..W..d..| 00000150 23 0f 16 40 a0 c7 ae 79 34 6f a8 5b 88 14 a0 2f |#[email protected]. [.../| 00000160 fa 4f 45 da eb 84 77 de 56 9b bf d3 95 9e d6 74 |.OE...w.V......t| 00000170 ef b1 21 1e cc 0c a4 fa 50 57 e3 7e 5f 57 f9 d8 |..!.....PW.~_W..| 00000180 2d 64 48 77 60 ca 53 e8 ce 06 c6 2e e8 fd a7 2d |- dHw`.S........-| 00000190 0e f8 d8 f9 ba 5c 04 7c 80 2e 37 24 17 0c 7c 65 |.....\.|..7 $..|e| 000001a0 59 8c b8 4a 13 e7 13 a8 36 72 87 75 03 27 93 25 | Y..J....6r.u.'.%| 000001b0 9a c5 05 dd fb 18 73 32 f2 0d bb 9b 77 2f 47 3b |......s2....w/ G;| 000001c0 c0 3f 75 02 07 0d 6d d2 33 fa f6 7f 54 d4 4a 43 |.? u...m.3...T.JC| 000001d0 49 f9 fb ec cc 2e bb b2 63 b5 b3 b6 4b 49 49 92 | I.......c...KII.| 000001e0 40 81 e1 11 22 e8 6b 7b c3 09 aa 74 df 26 77 d1 |@...".k {...t.&w.| 000001f0 60 e7 61 c9 43 d8 2c cc 34 c9 96 b3 cb 55 5a 12 | `.a.C.,.4....UZ.| 00000200 =============================== StdErr Messages: =============================== xz: (stdin): Compressed data is corrupt xz: (stdin): Compressed data is corrupt awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in _______________________________________________ Help-grub mailing list [email protected] https://lists.gnu.org/mailman/listinfo/help-grub
