On Thu, Apr 13, 2017, at 10:43 AM, Andrei Borzenkov wrote: > BIS correctly display grub2 on this distribution. Please make full > RESULTS.txt available.
Since you were suggesting the RESULSTS.txt would have important info, I took a good long look at the differences in the two Systems' results. Finally, adding this to the grub config GRUB_DISABLE_LINUX_UUID=false and changing my /etc/fstab - /dev/md0 /boot ... + UUID=(uuid of the md0) /boot ... now both Systems boot up without any delay. There's no other RAID or disk devices on either system so I don't know what might be getting searched incorrectly but it seems that explicitly setting the UUID= does the trick. I still have the Grub installed in the partition on the one SYstem -- but I guess that since the MBR is *also* installed that that takes precedence, and the info in the partition gets ignored. Not 100% sure of that though. And would like to figure out how to remove from the partition, leaving the MBR alone, and NOT screwing my setup! JerryG _______________________________________________ Help-grub mailing list [email protected] https://lists.gnu.org/mailman/listinfo/help-grub
