I am using sway/wayland as my windowmanager and have managed to get my usb wifi card to work on guix with rtl8812au-aircrack-ng-linux-module.
When I reboot my machine I now need to do the following steps to connect to the wifi: 1. disconnect the usb cable of the wifi-card. reconnect the usb cable of the wifi-card 2. run: sudo nmcli device wifi connect "my-wifi-name" password my-wifi-password I am very happy that I was able to get so far already (and it was not easy). But now I would like to have a better way to auto-connect to wifis and store the credentials. Can someone explain me how this works? I am not really sure how network-manager and wpa-supplicant work together, and if saving of passwords is something that guix supports, or if I have to add all the passworts to a wpa-supplicant config into the guix config. The second thing that I dont get is that when I have setup the wifi card for the first time, it would not route the traffic throught it, until I have executed this commands: iw wlp0s20f0u4 link ip link show wlp0s20f0u4 ip link set wlp0s20f0u4 up sudo dhclient wlp0s20f0u4 ip addr show wlp0s20f0u4 ifconfig wlp0s20f0u4 ip route show sudo ip route add default via 192.168.1.1 dev wlp0s20f0u4 I had to do this only once. Now it seems to be saved somewhere. Thanks!!!
