--- Denis Bodor <[EMAIL PROTECTED]> wrote:
> Hi,
>
> I have a probleme on my PIII box at home with
> Gnumach and/or Hurd.
> During the boot process GnuMach (i think so) just
> hang after the COM
> ports detection. The process seem to be frozen and
> the HD led is on
> (not blinking).
> On another box (P233, at work), the Hurd work fine.
> I have try to rebuild gnumach and hurd (cross
> compiling) with the
> same result.
>
> So my question is quite simple : what do GnuMach
> juste after checking
> the COM ports ?
>
> I know that's not the COM ports code because when i
> desactivate ports
> in BIOS, gnumach hang after partitions checks.
>
> Is there a documentation explaining the boot process
> ?
>
> thanks
>
> --
> Denis Bodor
> "It's time to join the Hurd and be a GNU !"
>
I ran into a similar problem. From what i could tell,
it tries to
initialize the network cards at this point. I have an
NE2000 card that
is pnp so it only is activated when rebooting from
linux, and that is
when i got the problem.
So my question is are the drivers in serverboot.gz or
gnumach?
if serverboot.gz how do i replace it to have ne2000
drivers?
James Morrison
__________________________________________________
Do You Yahoo!?
Get Yahoo! Mail � Free email you can access from anywhere!
http://mail.yahoo.com/
