Please keep replies to the mailing so that others can participate in the discussion and learn from the result.
yangsaiqing wrote: > D:\program\cvs2svn>D:\program\Python24\python D:\program\cvs2svn\cvs2svn > --encoding=gb2312 --use-cvs -s F:\svnServer\Dragon10 > F:\cvs_Dragon_Server\Dragon > ... > ERROR: The command '['cvs', '-q', '-R', 'co', '-r1.1', '-p', '-kk', > 'Dragon/Source/2DPage/2DPage.cpp']' failed with exit status: 1 > and the following output: > cvs [checkout aborted]: the :pserver: access method is not installed on this > system For cvs2svn help let me suggest the [EMAIL PROTECTED] mailing list. However that error above seems pretty direct. Because of the --use-cvs option it is trying to use the :pserver: access method of CVS. But generally that should not be needed. Are these cvs ,v files or rcs ,v files? > D:\program\cvs2svn>D:\program\Python24\python D:\program\cvs2svn\cvs2svn > --encoding=gb2312 -s F:\svnServer\Dragon10 F:\cvs_Dragon_Server\Dragon > ... > ERROR: The command '['co', '-q', '-x,v', '-p1.1', '-kk', > 'F:\\cvs_Dragon_Server\\Dragon\\Source\\2DPage\\2DPage.cpp,v']' failed with > exit status:1 and the following output: > cvs [rcsfilet aborted]: -q or -Q muset be specified before "rcsfile" I don't understand that error at all. It looks like a different problem than what you previously reported. > So what can I do? :) I am really not sure what you can do. Things seem pretty messed up but without any obvious reason. Plus you are running on an operating system that I find particular difficult. Perhaps someone else on the mailing list will have an idea. Is this a project that you can post the sources to on the internet? I might take a look at them if they were available. Bob yangsaiqing wrote: > :) > if I use the command as : > > D:\program\cvs2svn>D:\program\Python24\python D:\program\cvs2svn\cvs2svn > --encoding=gb2312 --use-cvs -s F:\svnServer\Dragon10 > F:\cvs_Dragon_Server\Dragon > > then it will be: > > "Creating Subversion r9124 (commit) > Creating Subversion r9125 (commit) > Creating Subversion r9126 (commit) > Creating Subversion r9127 (commit) > Creating Subversion r9128 (commit) > Done > ----- pass 6 ----- > Sorting symbolic name source revisions... > Done > ----- pass 7 ----- > Determining offsets for all symbolic names... > Done. > ----- pass 8 ----- > Creating new repository 'F:\svnServer\Dragon10' > Starting Subversion Repository. > Starting Subversion r1 / 9128 > Starting Subversion r2 / 9128 > ERROR: The command '['cvs', '-q', '-R', 'co', '-r1.1', '-p', '-kk', > 'Dragon/Sour > ce/2DPage/2DPage.cpp']' failed with exit status: 1 > and the following output: > cvs [checkout aborted]: the :pserver: access method is not installed on this > system > " > > if I use the command as : > > D:\program\cvs2svn>D:\program\Python24\python D:\program\cvs2svn\cvs2svn > --encoding=gb2312 -s F:\svnServer\Dragon10 F:\cvs_Dragon_Server\Dragon > > > then it wiil be : > > "Creating Subversion r9124 (commit) > Creating Subversion r9125 (commit) > Creating Subversion r9126 (commit) > Creating Subversion r9127 (commit) > Creating Subversion r9128 (commit) > Done > ----- pass 6 ----- > Sorting symbolic name source revisions... > Done > ----- pass 7 ----- > Determining offsets for all symbolic names... > Done. > ----- pass 8 ----- > Creating new repository 'F:\svnServer\Dragon10' > Starting Subversion Repository. > Starting Subversion r1 / 9128 > Starting Subversion r2 / 9128 > ERROR: The command '['co', '-q', '-x,v', '-p1.1', '-kk', > 'F:\\cvs_Dragon_Server\\Dragon\\Source\\2DPage\\2DPage.cpp,v']' failed with > exit status:1 and the following output: > cvs [rcsfilet aborted]: -q or -Q muset be specified before "rcsfile" > " > > So what can I do? :) > ----- Original Message ----- > From: "Bob Proulx" <[EMAIL PROTECTED]> > To: "yangsaiqing" <[EMAIL PROTECTED]> > Cc: <[email protected]> > Sent: Monday, July 23, 2007 4:21 PM > Subject: Re: a question of co.exe > > > > yangsaiqing wrote: > >> I want use the soft "cvs2svn" to translate cvs data into svn > >> data ,which need use "co.exe",But when I run the command,it > >> failed,as the accessories. What can I do for this? > >> help me:) > > > > In the future please simply include the text of your problem and not a > > jpeg screem capture. The size of the screen capture is huge and not > > as easy to work with as the text of the error. > > > > Transcribed: > >> original_size.ico,v:51 unknown character `_' > > > > That indicates that the ,v file is corrupted. On line 51 of that file > > an '_' character is unexpected. The file is now corrupted. > > > > Because .ico files are binary files special care needs to taken when > > committing changes and some file copy programs need to be told to copy > > them in binary mode. > > > > I don't know what to suggest at this time. You may be able to > > carefully edit the ,v file with an editor and to correct the problem. > > But be sure to keep a backup in case the editing makes the problem > > worse. > > > > Bob >
