Hello, I am attempting to set up Disk Latency monitoring on some of our Windows 2008 servers using Nagios XI and check_nt. I am using the following command:
./check_nt -H xxx.xxx.xxx.xxx -s "***********" -p 12489 -v COUNTER -l "\\PhysicalDisk(0 C:)\\Avg. Disk sec/Read","C Drive Read Latency (ms) is %0.4f" -w 0.02 -c 0.04 I am getting the following result: C Drive Read Latency (ms) is 0.0000 | 'C Drive Read Latency (ms) is %0.4f'=0.000000%;0.000000;0.000000; It is always returning a value of 0. Looking at the actual perfmon readings on the server show values in the 0.002 to 0.015 range. After doing some investigation with other perfmons it appears that only whole numbers are being returned. Likewise, it also appears that we can only use whole numbers for the warning and critical levels. Is this correct or is there a configuration setting I am missing. Thank you for any assistance you can provide. Brian -- Brian E Planz / Sr Systems Administrator / Meteorologist MS 437-100, 2925 Briarpark Dr, Houston, TX, 77042, USA Phone: 713-430-7175 / VPN: 430-7175 / Mobile 713-264-2273 brian.e.pl...@rockwellcollins.com www.rockwellcollins.com
