Hi all, I'm in the planning stages of building hexayurt for burning man and have been learning and having a lot of fun making small scale models. I'm pretty excited about the yurt!
I'll be driving from Denver and most likely will be bringing the yurt on the top of my Subaru Forester. I am planning to sandwich it with plywood. I recently ran across some pictures of a yurt that used 1/2" thick Tuff-R for the roof and 1" for the walls. This seemed to reduce the volume of the yurt in "travel" mode quite a bit. Is this a reasonable way to build it, or is 1/2" not a good idea even if just for the roof? Also, I'm a bit unsure re: the filament tape on the playa...do I need to tape over it or is it fine on its own? lots of discussion about it being very flamable. thanks, -Jeff Here's a pic of what I was referring to: http://images.google.com/imgres?imgurl=http://lh6.ggpht.com/_BKeGvtlPpt4/RtzxwqGXebI/AAAAAAAAAZo/uxJbfYXtYW8/HPIM1484.JPG&imgrefurl=http://picasaweb.google.com/lh/photo/UtpTbcSW7zL7ZuWdI2WNSg&usg=__Xlv6iA54951yD9JU50Rgm6jC4U4=&h=1205&w=1600&sz=16&hl=en&start=50&tbnid=ydhh16-ifwd5uM:&tbnh=113&tbnw=150&prev=/images%3Fq%3Dhexayurt%26gbv%3D2%26ndsp%3D21%26hl%3Den%26sa%3DN%26start%3D42 --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "hexayurt" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/hexayurt?hl=en -~----------~----~----~----~------~----~------~--~---
