Dan the question as to duct tape vs bilfilament tape is a bigger and more relevant question than as to whether the tape should be outside or inside. The reason I say this is, whether your tape goes on the outside or the inside depends not only on the yurt design that YOU are going to do, but it also depends on the hinge technique *you* will be using as well. So these 2 variables aside...
Honestly, almost all my bifilament tape that was exposed to the sun last year completely dried out, it was just crispy and dead, and peeled right off, ergo it was essentially worthless (but it held up). The question is, had the winds last year been the normal strong winds you get at BM, would that tape not have held up? Based on past experiences from other yurters, it seems the tape does hold up even when crispy and fried. But it's definitely garbage for the next time you're going to use your yurt again. The bifilament tape that is not exposed to the sun stays VERY strong, and seems to be very resistant to punctures, dings and the sort. I don't know how resistant duct tape would be in this aspect. If you go with bifilament tape, and you want the outside tape to last for next year as well, than cover all sun-exposed bifilament tape with foil tape. There are people that have substituted bifilament tape with duct tape, however the tape I've used, and the duct tape I have seen the most positive feedback on is Gorilla duct tape. The problem is gorilla duct tape does not come in 6" widths. At least I have not come across any. And depending on the hinges you're doing, you may need 6" wide tape, hence the need for bifilament once again. I hope this is of assistance to you. If anyone else has differing experience or opinions, please chime in. -Alejandro On Thu, Jul 19, 2012 at 10:15 PM, Nocluewellmaybe <[email protected]> wrote: > What about gaffers tape? > > On Friday, July 13, 2012 11:53:34 AM UTC-7, Ben wrote: >> >> The forces at play on the Playa and other extreme weather areas are too >> great for the duct tape. >> >> On Thursday, July 12, 2012 5:29:32 PM UTC-4, DanBrown wrote: >> >>> This may just be the kind of question a layman would ask, but why use >>> bifilament tape on the outside joints when you can use regular duct tape on >>> the inside seams instead? Do the interior walls get hot enough to melt it? >> >> -- > You received this message because you are subscribed to the Google Groups > "hexayurt" group. > To view this discussion on the web visit > https://groups.google.com/d/msg/hexayurt/-/6hEa3lS0_xYJ. > To post to this group, send email to [email protected]. > To unsubscribe from this group, send email to > [email protected]. > For more options, visit this group at > http://groups.google.com/group/hexayurt?hl=en. > -- -Alejandro Moreno S. GreenMBA, Dominican University of California Cell (415) 578-8731 LinkedIn <http://www.linkedin.com/in/alejandromorenos> -- You received this message because you are subscribed to the Google Groups "hexayurt" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/hexayurt?hl=en.
