mind if i ... nope, i need a __name__ for the wikipage first ... but
it does look easy to wikify, and we're just about to end yet another
heatwave here, and i do have a solar panel

also, if someone does a model and takes a picture, off we'd go!

lucas

2012/7/24 Vinay Gupta <[email protected]>:
>
>
> http://web.archive.org/web/20031012091914/http://mindismoving.org/hexayurt/hexayurt_gallery/hexayurt_gallery.html
>
> The very first ever built. You can just about see the solar powered swamp
> cooler. It used a different design from the current models, I dunno if it's
> better or worse, but let me try and describe it.
>
> The Electrical Part
> =====
> 12v output solar panel connected directly to a computer case fan. All very
> basic, no batteries.
>
> The Water and Air Part
> =====
> The container was a large plastic tub from Wal-Mart. High up in one side I
> cut a hole for the case fan, and mounted it sucking air out of the box. In
> the other end I cut another hole, as large as I could manage while still
> leaving a six inch "bathtub" in the floor.
>
> In the sides, I drilled a series of tiny holes with an awl. Each hole held a
> twister paperclip. The paperclips were stuck through hanging washcloths,
> literally rags like you can buy in big bags in the car section of hardware
> stores. The rags were arranged in a zig-zag pattern like so:
>
> |--------  |
> |  --------|
> |--------  |
> |  --------|
> |--------  |
> |  --------|
> |--------  |
> |  --------|
>
> Here's the clever bit. To stop air going up over the top of the baffles, a
> sheet of plastic (from a strong garbage bag) was placed on top of the box
> before the lid was closed. The suction of the fan pulled it down tight on
> top of the baffles, and that kept the entire thing sealed effectively enough
> to hold the airflow.
>
> Just fill with a few gallons of water and turn on. The rags soaked up the
> water and produced a long, long, long airflow path through the box, with
> roughly laminar airflow (it's convoluted, but with large turning radiuses at
> the corners.) Off a 10w panel, the 6' hexayurt would get good-and-cold but
> the best application was as a refrigerator. We'd just put cans in the water
> and they'd get chilled. It was heaven. Important to insulate the base
> otherwise your precious cold goes straight into the ground. Air intake was
> recirculating air from the hexayurt, rather than outside air, I'm still not
> sure which approach is best for that.
>
> I never documented the design properly - we didn't get pictures, it was the
> early days! - sorry, that might have been useful at some point. It was
> pretty easy and pretty forgiving, and as cheap as cheap can be.
>
> Enjoy,
>
> Vinay
>
> --
> You received this message because you are subscribed to the Google Groups
> "hexayurt" group.
> To post to this group, send email to [email protected].
> To unsubscribe from this group, send email to
> [email protected].
> For more options, visit this group at
> http://groups.google.com/group/hexayurt?hl=en.
>

-- 
You received this message because you are subscribed to the Google Groups 
"hexayurt" group.
To post to this group, send email to [email protected].
To unsubscribe from this group, send email to 
[email protected].
For more options, visit this group at 
http://groups.google.com/group/hexayurt?hl=en.

Reply via email to