I would just shove them in the sides of the boards and then use gorilla tape to secure them.
On Thu, Aug 1, 2013 at 8:37 AM, Jay Batson <[email protected]> wrote: > +1 on the desire for this information. > > And just to be clear, I'd love to know how the magnets are being built in. > Just shoved into the foam of the wall? How far from the outside face > (e.g. 1/4", 1", ...)? > > On Wednesday, July 31, 2013 1:04:08 PM UTC-4, Gordon Jack wrote: >> >> Hi all, >> Making my first H12 hexayurt and I'd like to make a magnetic door. Can >> anyone advise what magnet size/strength to use for the magnetic door? Our >> design is basically the same as the magnetic door shown on appropedia >> (mitered edge 1" R-max for the door, plywood footboard). Also, what type >> of metal plate works well to attract the door to the magnets? Any horror >> stories of rare earth magnets not withstanding the rare earth wind speeds >> of the playa? >> >> Thanks, >> Gordon >> > -- > You received this message because you are subscribed to the Google Groups > "hexayurt" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at http://groups.google.com/group/hexayurt. > For more options, visit https://groups.google.com/groups/opt_out. > > > -- -- You received this message because you are subscribed to the Google Groups "hexayurt" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/hexayurt. For more options, visit https://groups.google.com/groups/opt_out.
