I figured this out while I was building my first hexayurt over the last couple weeks. It has probably been posted before, but I hadn't ever seen it, so I figured I'd post it for other first-timers.
The pointy ends of the roof pieces are pretty fragile, when cutting, moving, etc. We took foot-long pieces of sheet rock corners (the light-weight metal angles, about an inch on each side. and taped it along the side hear the point. Very sturdy now and only added a bit of weight. We set up our H18 at UNSCruz regional burn over the weekend, and it was great. We decided to cut a foot off the bottom before we go to BRC to make it 7' on the sides. A bit of waste this way, but figured it would be more stable and easier to set up, without much loss of roominess. -- You received this message because you are subscribed to the Google Groups "hexayurt" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/hexayurt. For more options, visit https://groups.google.com/d/optout.
