we might JUST be in a pinch out there...only able to get 3 rolls of 6" 
shipped before the burn, otherwise depending on gorilla tape, foil 
tape...and really hoping my friend comes through with that last roll of 6 
inch bidirectional....

joshua livingroom
@the oh-kay hole
Alternative Energy Zone
330andE

On Tuesday, August 19, 2008 at 5:32:45 PM UTC-7, [email protected] wrote:
>
> We did a test-run of the bidirectional filament tape 
> both out at El Mirage (about 90F) and in our back 
> yard for a week at 100+ temperatures.  It held up 
> great.  It's a little costly, but since we ordered it 
> by the case, well, *shrug* 
>
> :) Connie-Lynne 
>
> P. S. We should have an extra roll or two with us out 
>     on the playa if anyone finds themselves fucked. 
>
> On Aug 17, 1:01 pm, RichShumaker <[email protected]> wrote: 
> > So here is the $64,000 question, 
> > What is the best tape to seal the interior edges, exterior tarp edges? 
> > (Not Structural part but Air and Light Leak parts) 
> > 
> > Duct Tape, Gorrila Tape, Foil Tape, Gaffers Tape, Painters Tape, 
> > Masking Tape, Clear Packing Tape, BiDirectional Filament Tape, 
> > Electrical Tape. 
> > 
> > Yes I mentioned some pretty ridiculous tapes above and I know some are 
> > BAD but I did that on purpose.  If I can get away with Masking tape 
> > and get a great seal for playa dust, I am THERE. 
> > I really like the Gorilla Tape for seams but not edges.  I just don't 
> > want to get to the Playa and have melty tape on my hands, literally. 
> > Does the interior taping and the edge taping on the tarp provide some 
> > structural purpose I am not aware of?  I would NEVER substitute 
> > something like masking tape to hold together the Hexayurt.  I just 
> > don't want whatever tape I decide to use to have it fall off, blow 
> > off, melt off, until the day I pack up.  So 7 to 10 days later. 
> > 
> > I really want to say THANK YOU to everyone on this group for all the 
> > help you have given me during this project.  It made it possible and 
> > actually easy for a non-builder to do.  Also big thanks to Vinay Gupta 
> > for this amazing project. 
> > 
> > Rich Shumaker

-- 
You received this message because you are subscribed to the Google Groups 
"hexayurt" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
To post to this group, send email to [email protected].
Visit this group at http://groups.google.com/group/hexayurt.
For more options, visit https://groups.google.com/d/optout.

Reply via email to