We have been successful with a shop vac sucking as a very sharp kitchen knife sliced . .
In any event, just to make certain for the new kids on the block, this work is NOT to be accomplished on playa, no matter which methods of cutting . . . . > On Mar 23, 2017, at 11:27 PM, D.V.Rogers <[email protected]> wrote: > > Whether your cutting Thermax, Hunter XCI, Rmax, Tuff-R panels etc etc best > NOT use handsaws, powersaws, jig saws, band saws etc etc as they create messy > Moop and don't create nice straight cuts.. > > Use a Wall Scraper like this one from Home Depot REF: https://is.gd/3y0auv > <https://is.gd/3y0auv> > > Sharpen one edge with a flat file creating a nice sharp edge. > > You will also need some kind of straight edge. See video below. > > Cutting Rigid Insulation Panel Video > https://youtu.be/KuFWRTEULD0 <https://youtu.be/KuFWRTEULD0> > > I have tried them all, including box cutters and this is the way to go… > > -- > You received this message because you are subscribed to the Google Groups > "hexayurt" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected] > <mailto:[email protected]>. > To post to this group, send email to [email protected] > <mailto:[email protected]>. > Visit this group at https://groups.google.com/group/hexayurt > <https://groups.google.com/group/hexayurt>. > For more options, visit https://groups.google.com/d/optout > <https://groups.google.com/d/optout>. -- You received this message because you are subscribed to the Google Groups "hexayurt" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at https://groups.google.com/group/hexayurt. For more options, visit https://groups.google.com/d/optout.
