Kevin - The general setup is to put the swamp cooler outside the yurt / tent, and vent it inside. I don’t see how to do this with that Amazon unit. Have you tried putting that unit inside the structure to be cooled? Is the net temp change good?
> On Jul 27, 2018, at 11:57 AM, Kevin Fischer <kfisc...@gmail.com> wrote: > > I admire the DIY attitude but it should be more widely known that mass > manufactured swamp coolers are available on Amazon Prime and the $200 one > will evaporate more water than you probably want to give it if you run it on > high and is overkill for an H12. > > https://www.amazon.com/SPT-SF-614P-Evaporative-Cooler-Cooling/dp/B00TRLXXWA/ref=sr_1_17?s=home-garden&ie=UTF8&qid=1532685161&sr=1-17&keywords=swamp+cooler > > <https://www.amazon.com/SPT-SF-614P-Evaporative-Cooler-Cooling/dp/B00TRLXXWA/ref=sr_1_17?s=home-garden&ie=UTF8&qid=1532685161&sr=1-17&keywords=swamp+cooler> > is what I used last year and it kept me sleeping in till 2PM without fail. > > You can build more airflow for the price yourself but perfectly lining up the > evap pads is hard and nothing hand build will be as well sealed as what you > can buy online. > > Burning Man: Adventures in extreme consumerism. > > On Wed, Jul 25, 2018 at 10:23 AM, Steve Upstill <upst...@gmail.com > <mailto:upst...@gmail.com>> wrote: > After years of struggling with the Home Depot swamp cooler, and inspired by a > friend of a friend, I started over, and made this: > <IMG_20180724_195151114.jpg><IMG_20180724_195216011.jpg> > > The vessel is a swing-lid trash can > <https://www.homedepot.com/p/Rubbermaid-12-5-Gal-Black-Swing-Top-Wastebasket-2007870/301227226?keyword=071691183082&semanticToken=200300+++%3E++++st%3A%7B071691183082%7D%3Ast++cn%3A%7B0%3A0%7D++71691183082+%7Bproductkey%7D+qu%3A%7B71691183082%7D>, > and the filter holders are cheap-ass soffit vents (two wide > <https://www.homedepot.com/p/Construction-Metals-14-in-x-8-in-Galvanized-Steel-Reversible-Foundation-Vent-TW148/202092772?keyword=736223133613&semanticToken=200300+++%3E++++st%3A%7B736223133613%7D%3Ast++cn%3A%7B0%3A0%7D++736223133613+%7Bproductkey%7D+qu%3A%7B736223133613%7D> > and one narrow > <https://www.homedepot.com/p/Construction-Metals-14-in-x-5-in-Galvanized-Soffit-Vent-SV145/202093194?keyword=736223106020&semanticToken=200300+++%3E++++st%3A%7B736223106020%7D%3Ast++cn%3A%7B0%3A0%7D++73622310602+%7Bproductkey%7D+qu%3A%7B73622310602%7D>) > from the ventilation-and-flashing aisle, both from HD. The evaporative area > is more than 50% larger than my old bucket cooler, the water capacity two or > three times greater, and since the fan points horizontally (i.e, toward the > yurt rather than the sky), it requires a fraction of the length of duct to > get to the building, so I expect higher flow AND less heat gain. I haven't > been out to the Playa with it, but I'm getting 5°F cooling at 68° temperature > and 68% humidity. > > The pump is a 3.6W 12V aquarium pump (2 for $15 at Amazon > <http://a.co/7D19LdH>), and that white thing at the bottom is a float switch > <http://a.co/iUFlZPy> to cut it off when the water gets too low. > > It has a cigarette-lighter male plug for power in, so I can either run it off > a car battery or 12V solar panels. At the top, barely visible on the right, > are simple 12V voltage regulators for the fan and the pump. I bought a pair > of these solar panels <http://a.co/2V2y5bT> years ago, and those voltage > regulators are all the control you need (I think they were $1.69 at my local > electronics depot, ad I have two, one for the pump and one for the fan, just > b/c they're so wimpy). > > The lid was a bit of a mission to build, because you want a good seal, yet > the bin has rounded corners. > You'll have to follow this link to see what I mean. > <https://photos.app.goo.gl/Qavvxp7t9V32nVqX6> > Rather than try to duplicate the bowing of the box, I exploited it by gently > forcing it straight, to provide pressure against the outside. (I used the > dado blade on my table saw to cut the channels, but you don't really need it > to be held on both sides.) For the curves, I used Bondo: plopped it down > inside the lid, greased up the bin with butter, put it in place and let it > define its own shape. I suppose you could work from the inside and pile more > Bondo up on the lip, but that felt like overkill to me. You could also do it > entirely with Bondo, allowing the box to keep its natural shape, only if your > Bondo skills are better than mine. > > So will a hot, dry Playa give me enough temp. drop to sleep in? We shall see. > It does seem to be moving a lot of air. > > Cheers, > Steve Upstill > > -- > The only cure for hate speech is more speech. The only cure for hate is love. > > -- > You received this message because you are subscribed to the Google Groups > "hexayurt" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to hexayurt+unsubscr...@googlegroups.com > <mailto:hexayurt+unsubscr...@googlegroups.com>. > To post to this group, send email to hexayurt@googlegroups.com > <mailto:hexayurt@googlegroups.com>. > Visit this group at https://groups.google.com/group/hexayurt > <https://groups.google.com/group/hexayurt>. > For more options, visit https://groups.google.com/d/optout > <https://groups.google.com/d/optout>. > > > -- > You received this message because you are subscribed to a topic in the Google > Groups "hexayurt" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/hexayurt/smjNKHdGL5Y/unsubscribe > <https://groups.google.com/d/topic/hexayurt/smjNKHdGL5Y/unsubscribe>. > To unsubscribe from this group and all its topics, send an email to > hexayurt+unsubscr...@googlegroups.com > <mailto:hexayurt+unsubscr...@googlegroups.com>. > To post to this group, send email to hexayurt@googlegroups.com > <mailto:hexayurt@googlegroups.com>. > Visit this group at https://groups.google.com/group/hexayurt > <https://groups.google.com/group/hexayurt>. > For more options, visit https://groups.google.com/d/optout > <https://groups.google.com/d/optout>. -------- Jay Batson batson...@gmail.com <mailto:batson...@gmail.com> Mobile: +1-978-758-1599 Blog: http://startupdj.com <http://startupdj.com/> Twitter: @jab <http://twitter.com/jab> Schedule time to meet or talk <http://doodle.com/batsonjay> -- You received this message because you are subscribed to the Google Groups "hexayurt" group. To unsubscribe from this group and stop receiving emails from it, send an email to hexayurt+unsubscr...@googlegroups.com. To post to this group, send email to hexayurt@googlegroups.com. Visit this group at https://groups.google.com/group/hexayurt. For more options, visit https://groups.google.com/d/optout.
