Hi Chris
The wheel is 7 1/2 " which is the same as the one one a Tixier I restored.
Having a big wheel gives a relatively flat area where the chanters lie -
useful when you have three. It also makes the rim more responsive to
trompette .
Cheers
Neil
----- Original Message -----
From: "Chris Nogy" <[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Sunday, June 08, 2008 2:45 AM
Subject: Re[2]: [HG] Chanterelle string for low D
Outstanding, rich, entrancing sound. But that wheel looks to be about the
size of a dinner plate....
Terriffic
Chris
*********** REPLY SEPARATOR ***********
On 6/7/2008 at 11:38 AM [EMAIL PROTECTED] wrote:
Hi Arle
Pleased to report a bit of a breakthrough re. the low d chanter. I still
have not found the make of the string I have that works best but a major
improvement in harmonic resistance is gained by only applying cotton at
the
keybox edge of the wheel. This effectively bows the string further away
from
the bridge. It also imparts a more mellow tone.My first tentative
scratchings can be seen here :
http://vids.myspace.com/index.cfm?fuseaction=vids.individual&videoid=35597142
I'm sure I've heard this tune somewhere, does anyone have a title or
discography for it?
Cheers
Neil
http://www.hurdy-gurdy.org.uk
----- Original Message -----
From: "Arle Lommel" <[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Wednesday, May 28, 2008 8:08 PM
Subject: Re: [HG] Chanterelle string for low D
Hi Neil,
How do you define "limited success"? What hasn't worked with what
you've
tried? I admit that I can't help you here since I play in C/G with an
octave chanter using viola strings with no problem, but you want to go
a
fourth lower and there I have no success. But in any event it would
help
to know what the problem you've faced is exactly.
Part of the problem may be that you're really quite low. Balázs Nagy
experimented with chanterelles in the range you suggest for a bass
instrument and found that below a certain pitch (somewhere near where
you're talking about, if I remember correctly), the vibrational
envelope
of the string gets too big for the tangents to effectively stop the
string (the string bounces off them or something like that), so you end
up with unclear intonation and other related problems. I don't remember
all the details, but he ran into these problems when trying to pitch a
Hungarian instrument down an octave, which would put it right near the
range you're talking about.
-Arle
On May 28, 2008, at 2:50 PM, [EMAIL PROTECTED] wrote:
Hi all
I'm not usually one to plead for help but this problem is costing a
lot
of time and money so any help will be greatly appreciated.
I've just built a three chantrelle gurdy 345mm scale length and am
tuning it to normal D/G tuning . The third chanterelle is to be the
next
octave D down.
Has anyone found a string to achieve a reasonable result at this pitch
?
I've tried a lot of viola C strings with limited success.
Regards
Neil Brook
--
No virus found in this incoming message.
Checked by AVG. Version: 7.5.524 / Virus Database: 269.24.1/1470 -
Release
Date: 28/05/2008 07:20
--
No virus found in this incoming message.
Checked by AVG.
Version: 7.5.524 / Virus Database: 269.24.5/1479 - Release Date:
02/06/2008 19:02
