Same here for printing staying on. We use Thermo ColorFrost, slides have no problems. It may depend on the finish the manufacturer uses for the paint on the slides.
Pam Marcum -----Original Message----- From: histonet-boun...@lists.utsouthwestern.edu [mailto:histonet-boun...@lists.utsouthwestern.edu] On Behalf Of Walter Benton Sent: Thursday, July 24, 2014 1:27 PM To: Gudrun Lang; histonet@lists.utsouthwestern.edu Subject: RE: [Histonet] problems Sllde Mate print Gudrun, We have 2 slide mates and we run our slides through all reagents and do not have the issue you describe. The only issue we experienced was poor print quality due to the type of paint on the frosted end of the slides. I recently switched to Leica's charged slide that is designed for Thermal Printers like the slide mate and the print quality is top notch and does not fade, peel, or smear when touched and ran through xylene, alcohol, retrieval solutions etc.... Part # 3800090 SLIDE WHITE Xtra Thermal Are your ribbons old? Walter Benton HT(ASCP)QIHC Histology Supervisor Chesapeake Urology Associates 806 Landmark Drive, Suite 127 Glen Burnie, MD 21061 443-471-5850 (Direct) 410-768-5961 (Lab) 410-768-5965 (Fax) Chesapeakeurology.com Voted a Best Place to Work by Baltimore and Modern Healthcare Magazines. ________________________________________ From: histonet-boun...@lists.utsouthwestern.edu [histonet-boun...@lists.utsouthwestern.edu] On Behalf Of Gudrun Lang [gu.l...@gmx.at] Sent: Thursday, July 24, 2014 2:07 PM To: histonet@lists.utsouthwestern.edu Subject: [Histonet] problems Sllde Mate print Dear histonetters, we have problems with the stability of the print of our slide mates (Thermo). We use regular slides with frosted end. The print usually looks good and stable at the time of printing. But after staining the print comes off like peeled skin. Very easy to remove. We take care, that the print doesn't come in contact with organic solvents (deparaffination reagens = Histo SAV, butyl acetate), but without any logical reason the first line of the print peels off and the second and third line is rather ok. Has anyone seen similar problems and solved them? Gudrun Lang _______________________________________________ Histonet mailing list Histonet@lists.utsouthwestern.edu http://lists.utsouthwestern.edu/mailman/listinfo/histonet ________________________________ CONFIDENTIALITY NOTICE: The information contained in this electronic message is intended solely for the personal and confidential use of the designated recipient(s) named above and may contain information that is protected from disclosure under applicable law. If you are not the intended recipient, or the employee or agent responsible for delivering it to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this transmission is strictly prohibited. If you have received this transmission in error, please notify the transmitting person/department immediately by email or telephone (410) 581-5881 and delete the message without making a copy. _______________________________________________ Histonet mailing list Histonet@lists.utsouthwestern.edu http://lists.utsouthwestern.edu/mailman/listinfo/histonet ---------------------------------------------------------------------- Confidentiality Notice: This e-mail message, including any attachments, is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message. _______________________________________________ Histonet mailing list Histonet@lists.utsouthwestern.edu http://lists.utsouthwestern.edu/mailman/listinfo/histonet
