Hi Lauren, I have the same model and had a similar issue but my heating plate only went to like 30 Celsius. There are about 12 different fuses on the inside once you take it apart, you have to take all the screws out on the back and then life the whole top section off. There is one fuse for voltage regulation that went out on mine, I replaced that and it started working again. If you have a voltmeter you can check all the fuses, if there is no resistance then the fuse is bad.
Goodluck! Tony On Tue, Apr 10, 2018 at 1:51 PM, Lauren Sweeney via Histonet < email@example.com> wrote: > Hello all in Histoland! > > We have a Leica EG 1150 H purchased in 2002 and we are starting to have > issues with it not heating in the cassette and mold warmers as hot as it > used to. The settings are all the way up to the max (70) but when I > measured the actual temps it is in the low 50's. Has anyone else had this > issue and if so would you mind sharing how you dealt with it? > > Thanks, > > Lauren > > > > _______________________________________________ > Histonet mailing list > Histonet@lists.utsouthwestern.edu > http://lists.utsouthwestern.edu/mailman/listinfo/histonet > -- Tony Auge HTL (ASCP)CM QIHC Cell: (651) 373-4768 Email: tony.a...@gmail.com _______________________________________________ Histonet mailing list Histonet@lists.utsouthwestern.edu http://lists.utsouthwestern.edu/mailman/listinfo/histonet