James,
Switching operating systems and rebuilding took up a lot more time than I
had expected. I am up and running now.
I am still getting the issue with that particular message being identified
as an ADT_A01 message.
I will be working on this all day (and for a good while now that I have my
work station up and running again).
Any ideas would be appreciated.
Thanks,
Garrett
On Fri, Nov 11, 2011 at 8:46 AM, Garrett McTear <[email protected]>wrote:
> James,
>
> I think what you said at the end might be the problem. I do have the
> latest version of HAPI, but I was using a test txt file to throw messages
> in.
>
> I am switching my operating system today, and may be out of commission
> most of the day if things do not go smoothly. As soon as I get up and
> running I will try and confirm what the issue is.
>
> At the end of the day yesterday, I did almost exactly what you have above
> there, minus the:
>
> parser.setValidationContext(new NoValidation());
>
> But when I used the getVersion() method, it was saying that the message
> was an ADT_A01 message.
>
> Thanks and I will update ASAP!
>
> Garrett
>
>
> On Fri, Nov 11, 2011 at 6:04 AM, James Agnew <[email protected]> wrote:
>
>> Hi Garrett,
>>
>> Hi Garrett,
>>
>> Strange, I put your message into your code and it seems to work for me.
>> The following:
>>
>> String msgString = "MSH|^~\\&|RAMSOFT|SENDING FACILITY|RAMSOFT|RECEIVING
>> FACILITY|20101223202939-0400||ADT^A08|101|P|2.3.1||||||||\r" +
>> "EVN|A08|20101223202939-0400||||\r" +
>>
>> "PID||P12345^^^ISSUER|P12345^^^ISSUER||PATIENT^TEST^M^^^^||19741018|M|||10808
>> FOOTHILL BLVD^^RANCHO CUCAMONGA^CA^91730^US||(909)481-5872^^^
>> [email protected]|(909)481-5800x1||M||12345|286-50-9510|||\r" +
>>
>> "PV1||O||||||||||||||||||||||||||||||||||||||||||||||||||\r" +
>> "AL1|1||^PORK^|\r" +
>> "AL1|2||^PENICILLIN^|";
>>
>> GenericParser parser = new GenericParser();
>> parser.setValidationContext(new NoValidation());
>> Message msg = parser.parse(msgString);
>> System.out.println(msg.getClass().getName());
>>
>> ..parses correctly. Are you using the latest version of HAPI? Is it
>> possible you are reading from a file and getting the wrong line endings or
>> charset or something?
>>
>> James
>>
>>
>> On Thu, Nov 10, 2011 at 6:00 PM, Garrett McTear <[email protected]
>> > wrote:
>>
>>> Code Section:
>>>
>>> Parser p = new GenericParser();
>>> Message hapiMsg;
>>> try {
>>> hapiMsg = p.parse(out.toString());
>>> logger.info( "doPost() : HL7 successfully parsed" );
>>> }
>>> catch (EncodingNotSupportedException e) {
>>> logger.info(e.getMessage());
>>> }
>>> catch (HL7Exception e) {
>>> logger.info(e.getMessage());
>>> }
>>>
>>> HL7 v2.3.1 ADT_A08 message that is not working:
>>>
>>> MSH|^~\&|RAMSOFT|SENDING FACILITY|RAMSOFT|RECEIVING
>>> FACILITY|20101223202939-0400||ADT^A08|101|P|2.3.1||||||||
>>> EVN|A08|20101223202939-0400||||
>>> PID||P12345^^^ISSUER|P12345^^^ISSUER||PATIENT^TEST^M^^^^||19741018|M|||10808
>>> FOOTHILL BLVD^^RANCHO
>>> CUCAMONGA^CA^91730^US||(909)481-5872^^^[email protected]|(909)481-5800x1
>>> ||M||12345|286-50-9510|||
>>> PV1||O||||||||||||||||||||||||||||||||||||||||||||||||||
>>> AL1|1||^PORK^|
>>> AL1|2||^PENICILLIN^|
>>>
>>> Error received:
>>>
>>> "Can't parse message beginning MSH|^~\&|RAMSOFT|SENDING
>>> FACILITY|RAMSOFT|RECEIVIN"
>>>
>>> Let me know if there is anything else I can provide.
>>>
>>> Thanks,
>>> Garrett
>>>
>>> On Thu, Nov 10, 2011 at 3:50 PM, James Agnew <[email protected]>wrote:
>>>
>>>> Hi Garrett,
>>>>
>>>> Can you post a code snippet showing the issue you are facing?
>>>>
>>>> James
>>>>
>>>>
>>>> On Thu, Nov 10, 2011 at 5:20 PM, Garrett McTear <
>>>> [email protected]> wrote:
>>>>
>>>>> I started taking on an HL7 project about two weeks ago. The project
>>>>> was left by the original programmer with very little documentation. Most
>>>>> of my time has been spent doing research. I have successfully used HAPI
>>>>> to
>>>>> parse messages from all of the version 2.x variants.
>>>>>
>>>>> The problem I ran into, however, is what happens when someone has
>>>>> taken the liberty to append a "custom extension" to a message. In
>>>>> particular, I am having issues with a modified v2.3.1 ADT_A08 message that
>>>>> cannot be processed by the same HAPI program that can process any other
>>>>> v2.3.1 message I throw at it.
>>>>>
>>>>> I downloaded the HAPI source code and have been digging, but I figured
>>>>> I would shoot an email to the mailing list and see if any of you had any
>>>>> tips on this type of issue.
>>>>>
>>>>> Specifics about my issue:
>>>>> I do get an error:
>>>>> EncodingNotSupportedException
>>>>> When using the GenericParser
>>>>> This same program handles other HL7 v2.3.1 files smoothly. But this
>>>>> modified ADT_A08 is the troublesome file.
>>>>>
>>>>> Thanks!
>>>>> Garrett
>>>>>
>>>>>
>>>>> ------------------------------------------------------------------------------
>>>>> RSA(R) Conference 2012
>>>>> Save $700 by Nov 18
>>>>> Register now
>>>>> http://p.sf.net/sfu/rsa-sfdev2dev1
>>>>> _______________________________________________
>>>>> Hl7api-devel mailing list
>>>>> [email protected]
>>>>> https://lists.sourceforge.net/lists/listinfo/hl7api-devel
>>>>>
>>>>>
>>>>
>>>
>>
>
------------------------------------------------------------------------------
All the data continuously generated in your IT infrastructure
contains a definitive record of customers, application performance,
security threats, fraudulent activity, and more. Splunk takes this
data and makes sense of it. IT sense. And common sense.
http://p.sf.net/sfu/splunk-novd2d
_______________________________________________
Hl7api-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/hl7api-devel
