Specifically, when I do this:
ADT_A08 msg = (ADT_A08)msg;
I get this error:
java.lang.ClassCastException: ca.uhn.hl7v2.model.v231.message.ADT_A01
cannot be cast to ca.uhn.hl7v2.model.v231.message.ADT_A08
On Wed, Nov 16, 2011 at 9:35 AM, Garrett McTear <garrett.mct...@gmail.com>wrote:
> James,
> Switching operating systems and rebuilding took up a lot more time than I
> had expected. I am up and running now.
>
> I am still getting the issue with that particular message being identified
> as an ADT_A01 message.
>
> I will be working on this all day (and for a good while now that I have my
> work station up and running again).
>
> Any ideas would be appreciated.
>
> Thanks,
> Garrett
>
>
> On Fri, Nov 11, 2011 at 8:46 AM, Garrett McTear
> <garrett.mct...@gmail.com>wrote:
>
>> James,
>>
>> I think what you said at the end might be the problem. I do have the
>> latest version of HAPI, but I was using a test txt file to throw messages
>> in.
>>
>> I am switching my operating system today, and may be out of commission
>> most of the day if things do not go smoothly. As soon as I get up and
>> running I will try and confirm what the issue is.
>>
>> At the end of the day yesterday, I did almost exactly what you have above
>> there, minus the:
>>
>> parser.setValidationContext(new NoValidation());
>>
>> But when I used the getVersion() method, it was saying that the message
>> was an ADT_A01 message.
>>
>> Thanks and I will update ASAP!
>>
>> Garrett
>>
>>
>> On Fri, Nov 11, 2011 at 6:04 AM, James Agnew <ja...@jamesagnew.ca> wrote:
>>
>>> Hi Garrett,
>>>
>>> Hi Garrett,
>>>
>>> Strange, I put your message into your code and it seems to work for me.
>>> The following:
>>>
>>> String msgString = "MSH|^~\\&|RAMSOFT|SENDING FACILITY|RAMSOFT|RECEIVING
>>> FACILITY|20101223202939-0400||ADT^A08|101|P|2.3.1||||||||\r" +
>>> "EVN|A08|20101223202939-0400||||\r" +
>>>
>>> "PID||P12345^^^ISSUER|P12345^^^ISSUER||PATIENT^TEST^M^^^^||19741018|M|||10808
>>> FOOTHILL BLVD^^RANCHO CUCAMONGA^CA^91730^US||(909)481-5872^^^
>>> sa...@ramsoft.com|(909)481-5800x1||M||12345|286-50-9510|||\r" +
>>>
>>> "PV1||O||||||||||||||||||||||||||||||||||||||||||||||||||\r" +
>>> "AL1|1||^PORK^|\r" +
>>> "AL1|2||^PENICILLIN^|";
>>>
>>> GenericParser parser = new GenericParser();
>>> parser.setValidationContext(new NoValidation());
>>> Message msg = parser.parse(msgString);
>>> System.out.println(msg.getClass().getName());
>>>
>>> ..parses correctly. Are you using the latest version of HAPI? Is it
>>> possible you are reading from a file and getting the wrong line endings or
>>> charset or something?
>>>
>>> James
>>>
>>>
>>> On Thu, Nov 10, 2011 at 6:00 PM, Garrett McTear <
>>> garrett.mct...@gmail.com> wrote:
>>>
>>>> Code Section:
>>>>
>>>> Parser p = new GenericParser();
>>>> Message hapiMsg;
>>>> try {
>>>> hapiMsg = p.parse(out.toString());
>>>> logger.info( "doPost() : HL7 successfully parsed" );
>>>> }
>>>> catch (EncodingNotSupportedException e) {
>>>> logger.info(e.getMessage());
>>>> }
>>>> catch (HL7Exception e) {
>>>> logger.info(e.getMessage());
>>>> }
>>>>
>>>> HL7 v2.3.1 ADT_A08 message that is not working:
>>>>
>>>> MSH|^~\&|RAMSOFT|SENDING FACILITY|RAMSOFT|RECEIVING
>>>> FACILITY|20101223202939-0400||ADT^A08|101|P|2.3.1||||||||
>>>> EVN|A08|20101223202939-0400||||
>>>> PID||P12345^^^ISSUER|P12345^^^ISSUER||PATIENT^TEST^M^^^^||19741018|M|||10808
>>>> FOOTHILL BLVD^^RANCHO
>>>> CUCAMONGA^CA^91730^US||(909)481-5872^^^sa...@ramsoft.com|
>>>> (909)481-5800x1||M||12345|286-50-9510|||
>>>> PV1||O||||||||||||||||||||||||||||||||||||||||||||||||||
>>>> AL1|1||^PORK^|
>>>> AL1|2||^PENICILLIN^|
>>>>
>>>> Error received:
>>>>
>>>> "Can't parse message beginning MSH|^~\&|RAMSOFT|SENDING
>>>> FACILITY|RAMSOFT|RECEIVIN"
>>>>
>>>> Let me know if there is anything else I can provide.
>>>>
>>>> Thanks,
>>>> Garrett
>>>>
>>>> On Thu, Nov 10, 2011 at 3:50 PM, James Agnew <ja...@jamesagnew.ca>wrote:
>>>>
>>>>> Hi Garrett,
>>>>>
>>>>> Can you post a code snippet showing the issue you are facing?
>>>>>
>>>>> James
>>>>>
>>>>>
>>>>> On Thu, Nov 10, 2011 at 5:20 PM, Garrett McTear <
>>>>> garrett.mct...@gmail.com> wrote:
>>>>>
>>>>>> I started taking on an HL7 project about two weeks ago. The project
>>>>>> was left by the original programmer with very little documentation. Most
>>>>>> of my time has been spent doing research. I have successfully used HAPI
>>>>>> to
>>>>>> parse messages from all of the version 2.x variants.
>>>>>>
>>>>>> The problem I ran into, however, is what happens when someone has
>>>>>> taken the liberty to append a "custom extension" to a message. In
>>>>>> particular, I am having issues with a modified v2.3.1 ADT_A08 message
>>>>>> that
>>>>>> cannot be processed by the same HAPI program that can process any other
>>>>>> v2.3.1 message I throw at it.
>>>>>>
>>>>>> I downloaded the HAPI source code and have been digging, but I
>>>>>> figured I would shoot an email to the mailing list and see if any of you
>>>>>> had any tips on this type of issue.
>>>>>>
>>>>>> Specifics about my issue:
>>>>>> I do get an error:
>>>>>> EncodingNotSupportedException
>>>>>> When using the GenericParser
>>>>>> This same program handles other HL7 v2.3.1 files smoothly. But this
>>>>>> modified ADT_A08 is the troublesome file.
>>>>>>
>>>>>> Thanks!
>>>>>> Garrett
>>>>>>
>>>>>>
>>>>>> ------------------------------------------------------------------------------
>>>>>> RSA(R) Conference 2012
>>>>>> Save $700 by Nov 18
>>>>>> Register now
>>>>>> http://p.sf.net/sfu/rsa-sfdev2dev1
>>>>>> _______________________________________________
>>>>>> Hl7api-devel mailing list
>>>>>> Hl7api-devel@lists.sourceforge.net
>>>>>> https://lists.sourceforge.net/lists/listinfo/hl7api-devel
>>>>>>
>>>>>>
>>>>>
>>>>
>>>
>>
>
------------------------------------------------------------------------------
All the data continuously generated in your IT infrastructure
contains a definitive record of customers, application performance,
security threats, fraudulent activity, and more. Splunk takes this
data and makes sense of it. IT sense. And common sense.
http://p.sf.net/sfu/splunk-novd2d
_______________________________________________
Hl7api-devel mailing list
Hl7api-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/hl7api-devel
