This sound right? I cleaned it up from the google translated version a lot.
The bzip2 compression will only be used if the packet sent from the server is larger than 2kb. The uncompressed data can be split into 2 packets and then gzipped in each packet.. It only gzipped the data in the packet if it is large, so sometimes only 1 of 2 packets received from the same server will be gzipped. You can check whether the recieved packets are gzipped or not from a byte in the packet, and you can find out on the wiki exactly which byte it is. Perl can unzip bzipped data. Otherwise, a lot of success at the test;) Andreas Grimm wrote:
Hi, it's a bit complicated for ne to explain it in english, sorry to non germans... die bzip2 kompression wird nur dann benutzt, wenn das paket, was den server verlässt, größer als 2kb ist. im unkompressiertem zustand müsste er die daten auf zwei pakete splitten und einzeln schicken ... durch das zippen aber kriegt man selbst große pakete klein genug, sodass es in ein paket passt ... deshalb ist es mal gezipp und mal ungezippt ... du kannst bei dem empfangenen paket auch abchecken, ob die daten gezippt sind oder nicht, dazu gibt es ein byte, was dir das mitteilt. ich weiss nicht mehr genau welches, aber das kannst du ja auf der wiki page über die server queries nachlesen. sofern du in perl auch bzip2 entpacken kannst, kannst du dann sowohl als auch bearbeiten ansonsten, viel erfolg beim testen ;) grüße andi -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Thursday, February 28, 2008 1:04 PM To: [email protected] Subject: Re: [hlds] Server Query Protocol? Hello, thats funny... I have 2 Servers now with the same count of cvars... The one sends all fine uncompressed and the other compressed but both has nett_compresssplits "1" Why they do that? At night i will check when i disable the compression! Thanks for this tip! With friendly Reguards from Germany Ratman2000 ----- Original Message ----- From: "Andreas Grimm" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Thursday, February 28, 2008 12:35 PM Subject: RE: [hlds] Server Query Protocol? Hi, you can use the net_compresssplits cvar to disable the server side compression. it is on by default. regards andi -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Thursday, February 28, 2008 12:22 PM To: [email protected] Subject: Re: [hlds] Server Query Protocol? Hello, can nobody help me? With friendly Reguards from Germany Ratman2000 ----- Original Message ----- From: <[EMAIL PROTECTED]> To: <[email protected]> Sent: Thursday, February 28, 2008 1:57 AM Subject: Re: [hlds] Server Query Protocol? Hello, thanks! Im searched now on the net to find any information, how to decompress the information, but i cant find an example, how to do it with perl... Is there a way, to disable the compression server side??? Or is there a way, to recieve the rules with perl? Thanks! With friendly Reguards from Germany Ratman2000 ----- Original Message ----- From: "Steven Hartland" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Wednesday, February 27, 2008 11:53 PM Subject: Re: [hlds] Server Query Protocol? Possibly see: http://developer.valvesoftware.com/wiki/Server_Queries ----- Original Message ----- From: <[EMAIL PROTECTED]> To: <[email protected]> Sent: Wednesday, February 27, 2008 10:46 PM Subject: Re: [hlds] Server Query Protocol? Hello, i dont know it... Is it posible??? Alfred? Mike? Whats wrong with this Server? Its not only one server... I found from 20 Servers 4 with this result but i dont know why... Please help me! With friendly Reguards from Germany Ratman2000 ----- Original Message ----- From: "Steven Hartland" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Wednesday, February 27, 2008 2:39 PM Subject: Re: [hlds] Server Query Protocol? Is that server using compression? ----- Original Message ----- From: <[EMAIL PROTECTED]> To: <[email protected]> Sent: Wednesday, February 27, 2008 9:48 AM Subject: [hlds] Server Query Protocol? Hello, i writing a Server Query Script in Perl to Check the Rules... The Script can recieve the Infos like Map, Server Name and this... But when i try to recieve the Rules, i only get Garbage... Im sending: send( SOCKET, "\xFF\xFF\xFF\xFF\x56$Challenge", 0 ) where $Challenge is the ChallangeID that i have recieved by the Challange ID Request... So all looks fine, but when i recieve the Rules i get that: þÿÿÿZ?ÇÂáÝÑBZh91AY&SYné ìãß?ÀèoSA¿ïÿðÀöê.$4ÔÆTýsÐi#Ð^ [EMAIL PROTECTED] 4ôSj51 ================================================ This e.mail is private and confidential between Multiplay (UK) Ltd. and the person or entity to whom it is addressed. In the event of misdirection, the recipient is prohibited from using, copying, printing or otherwise disseminating it or any information contained in it. In the event of misdirection, illegible or incomplete transmission please telephone +44 845 868 1337 or return the E.mail to [EMAIL PROTECTED] _______________________________________________ To unsubscribe, edit your list preferences, or view the list archives, please visit: http://list.valvesoftware.com/mailman/listinfo/hlds _______________________________________________ To unsubscribe, edit your list preferences, or view the list archives, please visit: http://list.valvesoftware.com/mailman/listinfo/hlds ================================================ This e.mail is private and confidential between Multiplay (UK) Ltd. and the person or entity to whom it is addressed. In the event of misdirection, the recipient is prohibited from using, copying, printing or otherwise disseminating it or any information contained in it. In the event of misdirection, illegible or incomplete transmission please telephone +44 845 868 1337 or return the E.mail to [EMAIL PROTECTED] _______________________________________________ To unsubscribe, edit your list preferences, or view the list archives, please visit: http://list.valvesoftware.com/mailman/listinfo/hlds _______________________________________________ To unsubscribe, edit your list preferences, or view the list archives, please visit: http://list.valvesoftware.com/mailman/listinfo/hlds _______________________________________________ To unsubscribe, edit your list preferences, or view the list archives, please visit: http://list.valvesoftware.com/mailman/listinfo/hlds _______________________________________________ To unsubscribe, edit your list preferences, or view the list archives, please visit: http://list.valvesoftware.com/mailman/listinfo/hlds _______________________________________________ To unsubscribe, edit your list preferences, or view the list archives, please visit: http://list.valvesoftware.com/mailman/listinfo/hlds _______________________________________________ To unsubscribe, edit your list preferences, or view the list archives, please visit: http://list.valvesoftware.com/mailman/listinfo/hlds
_______________________________________________ To unsubscribe, edit your list preferences, or view the list archives, please visit: http://list.valvesoftware.com/mailman/listinfo/hlds
