In the past I've created servers with RFC1918 addresses behind NAT devices. In theory that would mean that the server thinks that its single IP is an RFC1918 address, so therefore you should be able to put your machine behind a simple NAT router (try something like m0n0wall if you don't have anything handy, it'll happily move 10Mbit with a P2 200 or so). Once behind NAT just tie several addresses to the router and forward the ports for each address to said SRCDS server.
-Scott Gary wrote: > UDP doesn't like to be multihomed. If you want to do some type of > layer 4/7 load balancing you're going to have to spend some cash. > >> Network interface "bonding" (AKA Etherchannel, AKA Port Aggregation >> Protocol) is used to load balance multiple OSI layer 2 links (usually >> fast or gigabit Ethernet). It's used for redundancy and load balancing, >> not for adding multiple IP addresses to a user process. >> I suggest trying the 0.0.0.0 address theory that was suggested earlier. >> >> >> -Daniel >> >> _______________________________________________ >> To unsubscribe, edit your list preferences, or view the list >> archives, please visit: >> http://list.valvesoftware.com/mailman/listinfo/hlds_linux >> >> > > > > _______________________________________________ > To unsubscribe, edit your list preferences, or view the list archives, > please visit: > http://list.valvesoftware.com/mailman/listinfo/hlds_linux > _______________________________________________ To unsubscribe, edit your list preferences, or view the list archives, please visit: http://list.valvesoftware.com/mailman/listinfo/hlds_linux
