Robert Connolly wrote:
On May 26, 2006 01:35 pm, George Boudreau wrote:
If Robert says he has built a
hlfs(svn)-> hlfs(svn) then that is the end of the story and I will look
at my setup.

I have, but it was quite a while ago. Most of my builds are with uclibc. I think I did rebuild hlfs glibc, from hlfs, but I may have rebooted with some or all of the grsecurity options disabled. I noticed there is a glibc-localedef-segfault patch in the patch repository, but I haven't tried it. localedef was crashing when I rebuilt glibc on hlfs, which is maybe why I disabled grsecurity. So many things have changed since then, its hard to say why you are having difficulties.
   SUCCESS...
I manually added the localedef patch command to the jhalfs generated scripts and was able to have a hlfs(glibc)->hlfs(glibc) build run to completion.

I had flipped so many sysctl and paxctl switches in the past few days I am going to start from scratch and rebuild HLFS with jhalfs and, without touching a single parameter, attempt a hlfs->hlfs build. At this stage I am building without any testsuites but if all goes well then I will jump in the deep end and run the tests.

 (Robert,could you add the localedef patch to book?)


 These are the GRECURITY & PAX settings in for my kernel
#
# Security options
#

#
# PaX
#
CONFIG_PAX=y

#
# PaX Control
#
# CONFIG_PAX_SOFTMODE is not set
# CONFIG_PAX_EI_PAX is not set
CONFIG_PAX_PT_PAX_FLAGS=y
# CONFIG_PAX_NO_ACL_FLAGS is not set
CONFIG_PAX_HAVE_ACL_FLAGS=y
# CONFIG_PAX_HOOK_ACL_FLAGS is not set

#
# Non-executable pages
#
CONFIG_PAX_NOEXEC=y
CONFIG_PAX_PAGEEXEC=y
CONFIG_PAX_SEGMEXEC=y
# CONFIG_PAX_DEFAULT_PAGEEXEC is not set
CONFIG_PAX_DEFAULT_SEGMEXEC=y
CONFIG_PAX_EMUTRAMP=y
CONFIG_PAX_MPROTECT=y
CONFIG_PAX_NOELFRELOCS=y
# CONFIG_PAX_KERNEXEC is not set

#
# Address Space Layout Randomization
#
CONFIG_PAX_ASLR=y
CONFIG_PAX_RANDKSTACK=y
CONFIG_PAX_RANDUSTACK=y
CONFIG_PAX_RANDMMAP=y
CONFIG_PAX_NOVSYSCALL=y

#
# Grsecurity
#
CONFIG_GRKERNSEC=y
# CONFIG_GRKERNSEC_LOW is not set
# CONFIG_GRKERNSEC_MEDIUM is not set
# CONFIG_GRKERNSEC_HIGH is not set
CONFIG_GRKERNSEC_CUSTOM=y

#
# Address Space Protection
#
# CONFIG_GRKERNSEC_KMEM is not set
# CONFIG_GRKERNSEC_IO is not set
# CONFIG_GRKERNSEC_PROC_MEMMAP is not set
CONFIG_GRKERNSEC_BRUTE=y
CONFIG_GRKERNSEC_MODSTOP=y
# CONFIG_GRKERNSEC_HIDESYM is not set

#
# Role Based Access Control Options
#
CONFIG_GRKERNSEC_ACL_HIDEKERN=y
CONFIG_GRKERNSEC_ACL_MAXTRIES=3
CONFIG_GRKERNSEC_ACL_TIMEOUT=30

#
# Filesystem Protections
#
CONFIG_GRKERNSEC_PROC=y
CONFIG_GRKERNSEC_PROC_USER=y
CONFIG_GRKERNSEC_PROC_ADD=y
CONFIG_GRKERNSEC_LINK=y
CONFIG_GRKERNSEC_FIFO=y
CONFIG_GRKERNSEC_CHROOT=y
CONFIG_GRKERNSEC_CHROOT_MOUNT=y
CONFIG_GRKERNSEC_CHROOT_DOUBLE=y
CONFIG_GRKERNSEC_CHROOT_PIVOT=y
CONFIG_GRKERNSEC_CHROOT_CHDIR=y
CONFIG_GRKERNSEC_CHROOT_CHMOD=y
CONFIG_GRKERNSEC_CHROOT_FCHDIR=y
CONFIG_GRKERNSEC_CHROOT_MKNOD=y
CONFIG_GRKERNSEC_CHROOT_SHMAT=y
CONFIG_GRKERNSEC_CHROOT_UNIX=y
CONFIG_GRKERNSEC_CHROOT_FINDTASK=y
CONFIG_GRKERNSEC_CHROOT_NICE=y
CONFIG_GRKERNSEC_CHROOT_SYSCTL=y
CONFIG_GRKERNSEC_CHROOT_CAPS=y

#
# Kernel Auditing
#
# CONFIG_GRKERNSEC_AUDIT_GROUP is not set
# CONFIG_GRKERNSEC_EXECLOG is not set
# CONFIG_GRKERNSEC_RESLOG is not set
# CONFIG_GRKERNSEC_CHROOT_EXECLOG is not set
# CONFIG_GRKERNSEC_AUDIT_CHDIR is not set
# CONFIG_GRKERNSEC_AUDIT_MOUNT is not set
# CONFIG_GRKERNSEC_AUDIT_IPC is not set
# CONFIG_GRKERNSEC_SIGNAL is not set
# CONFIG_GRKERNSEC_FORKFAIL is not set
# CONFIG_GRKERNSEC_TIME is not set
# CONFIG_GRKERNSEC_PROC_IPADDR is not set
# CONFIG_GRKERNSEC_AUDIT_TEXTREL is not set

#
# Executable Protections
#
CONFIG_GRKERNSEC_EXECVE=y
CONFIG_GRKERNSEC_SHM=y
CONFIG_GRKERNSEC_DMESG=y
CONFIG_GRKERNSEC_RANDPID=y
# CONFIG_GRKERNSEC_TPE is not set

#
# Network Protections
#
CONFIG_GRKERNSEC_RANDNET=y
CONFIG_GRKERNSEC_RANDSRC=y
# CONFIG_GRKERNSEC_SOCKET is not set

#
# Sysctl support
#
CONFIG_GRKERNSEC_SYSCTL=y
CONFIG_GRKERNSEC_SYSCTL_ON=y

#
# Logging Options
#
CONFIG_GRKERNSEC_FLOODTIME=10
CONFIG_GRKERNSEC_FLOODBURST=4
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set

--
http://linuxfromscratch.org/mailman/listinfo/hlfs-dev
FAQ: http://www.linuxfromscratch.org/faq/
Unsubscribe: See the above information page

Reply via email to