> On Jul 23, 2016, at 5:34 AM, Juliusz Chroboczek > <[email protected]> wrote: > >> The problem came when “Step 3 - Converting WAN interface to Homenet” >> didn’t work as described. I clicked Delete for the WAN interface. > > Don't use the web interface. Ssh into the router, and use vi on > /etc/config/network, it's easier and more reliable.
OK. I read all the documentation I can find (I note that http://www.homewrt.org is off the air at this time), and have come up with what I thought would be a good process for configuring Homenet. Unfortunately, it doesn't quite work. Rather than describe the symptoms, I think it might be more efficient for someone to read through the steps outlined at https://gist.github.com/richb-hanover/ec88b851c4da074e48003e6fe9276901 and tell me if I've got it right? I would appreciate corrections, suggestions, edits, etc. Many thanks. Rich > > Here's how we make a Homenet router: > > opkg update > opkg install hnet-full ip tcpdump strace > vi /etc/config/system > vi /etc/config/network > vi /etc/config/wireless > vi /etc/config/firewall > /etc/init.d/network restart > (check the output for errors) > sync > reboot > > I'll publish Dorine's configuration files when I'm back in Paris, they're > a little beyond what you're interested in (they set up two mesh interfaces > and one AP on each node), but they're a good example. > > -- Juliusz _______________________________________________ homenet mailing list [email protected] https://www.ietf.org/mailman/listinfo/homenet
