Hi, 2 things:
1. It can be that Honeywall is blocking outside access to your honeypots. You need to check honeypot IP configuration at the honeywall along with iptable rules & test by simply pinging from outside and do a tcpdump on both eth0 and eth1 interface to see how far off the probe reaches. 2. Nepenthes machine is blocking inbound access or has some routing prob due to your architecture. For a test try traceroute something from nepenthes machine (Allow outbound traffic from honeypots in roo's conf first) Thanks, Fahim On Sat, Feb 14, 2009 at 6:00 AM, <[email protected]>wrote: > > Hello, > > I just setup Honeywall for the first time with a honeypot running > Nepenthes behind my Honeywall. My problem is that when I try to scan > for open ports from an outside network I don't see the open ports > Nepenthes is listening on. My network goes like this: > > Router -> Honeywall -> Hub -> Honeypots > > I've narrowed the problem down to Honeywall because I can see the open > ports when I move Nepenthes to the router. So what could be causing this? > > >
_______________________________________________ Honeywall mailing list [email protected] https://public.honeynet.org/mailman/listinfo/honeywall
