I'm looking at the serial number right now. It's 1754 meaning it was made in January of 1975 if I'm not mistaken. I can send you a picture of the serial plate once I get more batteries for my camera. It definitely has some age to it as it's had a little bit of patchwork done here and there and plenty of bell wear. It looks like a 35 year old horn to me. I do know it's definitely pre 1985. I wish I could tell you how the bores really are at different sections but I don't have a micrometer. Maybe I can find one at sears. -William In a message dated 11/22/2009 1:08:30 P.M. Eastern Standard Time, [email protected] writes:
Hi William, Are you sure the horn was made in 1975? I don't believe the 25A was available in 1975. Also, "dual-bore" horns WERE available in 1975, however, I believe it had a different meaning back then. The horns offered with the "dual-bore" system were the in descant family, including the full and compensating triples but the cylindrical tubing on each horn was all the same size. The "dual-bore" designation Paxman gave these horns referred to only the leadpipe which was split by a rotor after the first 6+ inches into a short fast tapered pipe on the hi F side and into a longer slower tapered pipe on the low F/Bb side. Both the hi F and the F/Bb pipes entered their rotors with the same final diameter. I would welcome any corrections to the above. Regards, Jerry in Kansas City _______________________________________________ _______________________________________________ post: [email protected] unsubscribe or set options at https://pegasus.memphis.edu/cgi-bin/mailman/options/horn/archive%40jab.org
