Hi Bob, I just packed it nicer, but using 300gsm in the tray or front feed is too heavy. At least that is my experience. The media pick up rollers can have problems picking the media and curving it through the media path. For this reason you have the rear path which can take medias up to 0.02in. That is 40 pounds per? 2.2 pounds is 1 kg.
Cheers Teddy ----- Original Message ---- From: Robert D. Elliott <[EMAIL PROTECTED]> To: [email protected] Sent: Tuesday, December 26, 2006 9:48:01 PM Subject: [HPDesignJet_Printers] Re: Designjet 90 Front Single Sheet Feeder - Teddy: I currently have a 8750 and a B9180. I am considering a Designjet 90. The way I have my office set up, it would be hard to use the rear path. The specs for the 90 show 40 pounds, but I could not find a translation to GSM which is printed on the box of most papers. I was looking for someone that had experience with the heavier papers. Thank you for the response. Bob -- In HPDesignJet_ Printers@ yahoogroups. com, Teddy Dako <[EMAIL PROTECTED] ..> wrote: > > Hi Bob, > > I think 300gsm is a bit too heavy for the front feed. Why not use the rear path instead? > > Cheers > Teddy > > > > ----- Original Message ---- > From: Robert D. Elliott <relliott5300@ ...> > To: HPDesignJet_ Printers@ yahoogroups. com > Sent: Tuesday, December 26, 2006 6:47:02 PM > Subject: [HPDesignJet_ Printers] Designjet 90 Front Single Sheet Feeder > > > > > > > > > > > > > > How thick of media in GSM will the front single sheet feed take? Will > > it thake 300gsm papers? > > > > Thanks, > > > > Bob Elliott __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com
