Mark" Any of the Z series users know if there is a way, during paper calibration, to have the test color patches run the length of the paper instead of bunching up in a clump at the end of the roll? It seems inefficient (especially with a 44 inch roll) to use a 6 or 8 inch wide piece of paper, leaving a yard of it blank, instead of running the test patches the full width of the paper.>
There are two profile chart formats: (1) A3/B for cut sheets, and (2) roll-paper format that puts the patches across the full width of the roll for minimum wasteage. Check your manual. Harald Johnson author, "Mastering Digital Printing, Second Edition" DP&I.com ( http://www.dpandi.com ) digital printing and imaging consultant Website: http://groups.yahoo.com/group/HPDesignJet_Printers Post message: [email protected] Subscribe: [EMAIL PROTECTED] Unsubscribe: [EMAIL PROTECTED] List owner: [EMAIL PROTECTED] Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/HPDesignJet_Printers/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/HPDesignJet_Printers/join (Yahoo! ID required) <*> To change settings via email: mailto:[EMAIL PROTECTED] mailto:[EMAIL PROTECTED] <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
