--- In [email protected], "oughterardgalway" <[EMAIL PROTECTED]> wrote: > The green led to the automatic roll feed kit does not light up. I > understand from the April thread that essentially I will have to > replace it. (the printer is under 2 years old) > However, I would appreciate some answers to the following; > Can it be repaired, > If not, where can I get this part in Ireland or UK. > and is it still possible to feed canvas through the rear feed slot.
Hi The roll-feed kit on a 130 isn't really a roll-feed kit at all, it's just a roll/tray switcher. All it does is unload/reload the active roll when you are switching between roll and sheet. You don't need one to use roll material on a 130, and 130s shipped in the UK (used to?) include dumb roll brackets which worked just as well for feeding roll. When the green LED in an auto kit stops lighting up, my experience is that you can just carry on using it to feed roll. All that happens is that to unload a roll you have to press unload buttons. My experience of the 130 roll path is that it puts too much tension on a roll to wind it through, so you get pressure marks on prints. We now sheet most of the materials we use on 130s & feed them through the manual slot. Kind regards, Perry Website: http://groups.yahoo.com/group/HPDesignJet_Printers Post message: [email protected] Subscribe: [EMAIL PROTECTED] Unsubscribe: [EMAIL PROTECTED] List owner: [EMAIL PROTECTED] Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/HPDesignJet_Printers/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/HPDesignJet_Printers/join (Yahoo! ID required) <*> To change settings via email: mailto:[EMAIL PROTECTED] mailto:[EMAIL PROTECTED] <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
