John: I haven't tried the satin, but I did try the glossy. I found the results only OK. The dark tones were not nearly as good as the Premium Plus. I used a custom profile as well. I suspect it is because the amount of ink put down was not enough. I didn't try ink increasing the ink to see if things improved. Keep in mind this is "Instant Dry" paper and your printer is a dye ink printer, which means no longevity unless you coat or spray the paper.
hope this helps Jim On Mon, 2007-09-03 at 17:58 +0000, John Elliott wrote: > Has anyone tried the HP Premium Instant-dry Satin Photo(Q7992A-for > roll paper) on the DJ130. I was at the HP site today and this paper > was listed for the DJ130. I have used only the HP Premium Plus Satin, > which is quite vulnerable to water. It is distinctly more expensive > than the Premium Plus satin but the water resistance might be worth > it. > > Does it show up in the calibration utility--my unit is off line at > the > moment. > > Thanks for any thoughts on the issue. > > John Elliott > Website: http://groups.yahoo.com/group/HPDesignJet_Printers Post message: [email protected] Subscribe: [EMAIL PROTECTED] Unsubscribe: [EMAIL PROTECTED] List owner: [EMAIL PROTECTED] Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/HPDesignJet_Printers/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/HPDesignJet_Printers/join (Yahoo! ID required) <*> To change settings via email: mailto:[EMAIL PROTECTED] mailto:[EMAIL PROTECTED] <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
