--- In [email protected], "Michael Keller" <[EMAIL PROTECTED]> wrote: > > I've never had mine stop partway through a print, it always refuses to start > printing when it's time to change. > ........................... > Hi... Actually, you have to be quick in changing the cartridge if you let > it run all the way out, as the ink on the paper dries and the ink from the > new cart. will not blend in all the way. I usually change the cart at about > 95%. Steve. > I ran countless rolls of paper though my 130 and ran every cartridge dry every time and it almost always happened right in the middle of a 24" x36" print. It NEVER failed to start a print job because of low ink. I NEVER noticed a defect or artifact. However, I don't recall ever waiting more than 5 minutes or so to get the new cart installed.
In addition, it seemed to print forever after the low ink warning came on. All-in-all I couldn't have been happier. I recently switched to a Z3100 and the wonderful ink replacement feature is the thing I miss most about my DJ-130. Website: http://groups.yahoo.com/group/HPDesignJet_Printers Post message: [email protected] Subscribe: [EMAIL PROTECTED] Unsubscribe: [EMAIL PROTECTED] List owner: [EMAIL PROTECTED] Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/HPDesignJet_Printers/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/HPDesignJet_Printers/join (Yahoo! ID required) <*> To change settings via email: mailto:[EMAIL PROTECTED] mailto:[EMAIL PROTECTED] <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
