kjust an update. I have been using Lascaux fixative to fic the colours then Lascaux UV varnish applied with a roller. The results are far better than without varnish and fade is much reduced.
Basically if you print canvas on a DJ130 you must use a UV varnish / protector to keep colours from fading. I have been using a small foam roller to apply but it can be a bit tricky getting all the air bubles out --- In [email protected], "Nick H. Nugent" <[EMAIL PROTECTED]> wrote: > > Hi Teddy, > > Yes, I only do it for dye ink as it fades so quickly on porous media > such as canvas or fineart papers, with canvas being the worst. > > --nick > > --- In [email protected], Teddy Dako > <teddydako@> wrote: > > > > Hi Nick, > > > > This treatment of the backside of the canvas prints, you mention, do > you do that because the ink you use is dye ink, or you'd do that with > pigment ink as well? Like on the 5500 UV printer? > > > Website: http://groups.yahoo.com/group/HPDesignJet_Printers Post message: [email protected] Subscribe: [EMAIL PROTECTED] Unsubscribe: [EMAIL PROTECTED] List owner: [EMAIL PROTECTED] Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/HPDesignJet_Printers/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/HPDesignJet_Printers/join (Yahoo! ID required) <*> To change settings via email: mailto:[EMAIL PROTECTED] mailto:[EMAIL PROTECTED] <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
