--- In [email protected], "bernardkesslerphd" <[EMAIL PROTECTED]> wrote: > > Has stopped printing from the roll but prints from the tray. The yellow printhead needs > replacing. Could that be it? Waiting for delivery. > Unlikely. If the tray works fine but the rear paths are wonky, it's most likely the clean-out at the back, it contains the rear paper path sensors.
Just take it out, (the part between the spindle brackets, it has a visible locking mechanism) clean all the electrical contacts (both, on the cleanout and the printer itself) and reseat it, these oxidate on occasion. You can also check the two sensors on the cleanout (on the left side, looking from the back) for paper resedue. ------------------------------------ Website: http://groups.yahoo.com/group/HPDesignJet_Printers Post message: [email protected] Subscribe: [EMAIL PROTECTED] Unsubscribe: [EMAIL PROTECTED] List owner: [EMAIL PROTECTED] Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/HPDesignJet_Printers/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/HPDesignJet_Printers/join (Yahoo! ID required) <*> To change settings via email: mailto:[EMAIL PROTECTED] mailto:[EMAIL PROTECTED] <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
