thank you Ed San Jose, I will look into what you suggested............. thanks, Don.
--- On Thu, 9/4/08, Ed San Jose <[EMAIL PROTECTED]> wrote: From: Ed San Jose <[EMAIL PROTECTED]> Subject: Re: [HPDesignJet_Printers] Re: hp dj 130.......inks To: [email protected] Received: Thursday, September 4, 2008, 11:44 PM if you already have dj130, it's difficult if not impossible to convert to pigment ink (I suggest trying out the inks designed for the B9180 w/ refillable tanks), if you only need to print mostly black, then the dj110+ & the dj100 already use pigment black, however from what I know, there are positive/silk screen films (for the epson 1520/3000 variety at least) that work well with the stock dye inks with good dmax- so bottom line is if you're starting from scratch & 17" width is ok, a refurbed/reengineer ed is probably epson 3000 is your best bet (available in ebay). bigger than that 7500/9500. ----- Original Message ---- From: enduser999 <[EMAIL PROTECTED] com.au> To: HPDesignJet_ Printers@ yahoogroups. com Sent: Thursday, September 4, 2008 3:51:43 PM Subject: [HPDesignJet_ Printers] Re: hp dj 130.......inks I saw one post somewhere from someone who did it using MIS's refillable carts. He said it shortened printhead life, but did work. --- In HPDesignJet_ Printers@ yahoogroups. com, "turbo_print" <turbo_print@ ...> wrote: > > Hello, > > I'm new to the fourm and would appreciate any advice in regards to > using pigmented ink(s) in a DJ 130......... just the black if > possible.... ....I wish to print positive films for my > business.... .....the epson is fine with these inks, but it wastes way > too much to make it cost effective. > .......thanks in advance > Don. > __________________________________________________________________ Yahoo! Canada Toolbar: Search from anywhere on the web, and bookmark your favourite sites. Download it now at http://ca.toolbar.yahoo.com.
