This is a case where USB enumeration of the Model is different from the Model field in the deviceID. We will add a "PSC_950xi" entry in models.xml to fix this issue.
With libusb HPLIP uses USB enumeration for device discovery instead of deviceID. USB enumeration is faster and always gives a serial number. We are locating a PSC 950 to test faxing. -dave > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of > Till Kamppeter > Sent: Wednesday, May 10, 2006 11:23 AM > To: Suffield, David > Cc: hplip-devel@lists.sourceforge.net; > hplip-help@lists.sourceforge.net; hplip; [EMAIL PROTECTED] > Subject: [Inkjet-list] HPLIP 0.9.11: REGRESSION: HP PSC 950xi > does not workany more > > > Oi, > > I tried to set up the HP PSC 950xi. I got the following on > the console as root: > > [EMAIL PROTECTED] c]# service hplip restart > Stopping hpiod: > [ OK ] > Stopping hpssd: > [ OK ] > Starting hpiod: > [ OK ] > Starting hpssd: > HP Linux Imaging and Printing System (ver. 0.9.11) > Services and Status Daemon ver. 7.5 > > Copyright (c) 2003-6 Hewlett-Packard Development Company, LP > This software comes with ABSOLUTELY NO WARRANTY. This is free > software, and you are welcome to distribute it under certain > conditions. See COPYING file for more details. > > > [ OK ] [EMAIL PROTECTED] c]# lpinfo -v network socket network > beh network socket://192.168.100.13 network > ipp://192.168.100.20:631/ipp direct > hp:/usb/PSC_950xi?serial=MY21AC21J6WP > direct hpfax:/no_device_found > network http > network ipp > network lpd > direct parallel:/dev/printers/0 > direct parallel:/dev/printers/1 > direct parallel:/dev/printers/2 > direct canon:/dev/lp0 > direct epson:/dev/lp0 > direct canon:/dev/lp1 > direct epson:/dev/lp1 > direct canon:/dev/lp2 > direct epson:/dev/lp2 > direct pdf > direct cups2pegg > direct scsi > network smb > network smb > [EMAIL PROTECTED] c]# hp-setup > > HP Linux Imaging and Printing System (ver. 0.9.11) > Printer/Fax Setup Utility ver. 2.0 > > Copyright (c) 2003-6 Hewlett-Packard Development Company, LP > This software comes with ABSOLUTELY NO WARRANTY. This is free > software, and you are welcome to distribute it under certain > conditions. See COPYING file for more details. > > > Choose device from probed devices connected on bus(es): usb: > > Num. Device-URI CUPS > printer(s) > ---- ---------------------------------------------------- > ------------------ > 0 hp:/net/hp_LaserJet_1320_series?ip=192.168.100.145 > HPLasJet1320 > > 1 hp:/usb/Photosmart_2600_series?serial=MY53OK70V10400 > HPPSmart2600 > > 2 hp:/net/Officejet_7400_series?ip=192.168.100.31 > HPOffJet7400 > > 3 hp:/net/HP_LaserJet_4050_Series_?ip=192.168.100.20 > HP_LaserJet_4050 > 4 hp:/usb/PSC_950xi?serial=MY21AC21J6WP > > > Enter number 0...4 for device (q=quit) ?4 > > Setting up device: hp:/usb/PSC_950xi?serial=MY21AC21J6WP > > (Note: Defaults for each question are maked with a '*'. Press > <enter> to accept the default.) > > [ERROR]: Unsupported printer model. > [EMAIL PROTECTED] c]# /usr/lib/cups/backend/hp > invalid ModelQueryResult: msg=modelqueryresult > result-code=48 > prnt/hpijs/hplip_api.c 396 > direct hp:/usb/PSC_950xi?serial=MY21AC21J6WP "HP PSC_950xi" > "hp:/usb/PSC_950xi?serial=MY21AC21J6WP" > "MFG:Hewlett-Packard;MDL:PSC 900 Series;SKU:PSC > 950xi;CMD:MLC,PCL,PML;CLASS:PRINTER;DESCRIPTION:Hewlett-Packar > d PSC 900 > Series;1284.3M:f7f,f7f;1284.4DL:4d,4e,1;SERN:MY21AC21J6WP;VSTA > TUS:$HB0$NC0,ff,DN,IDLE,CUT,K0,C0,SM,NR,KP008,CP081;AiO:00;DW-PCL;" > [EMAIL PROTECTED] c]# > > One sees that the CUPS backend "hp" recognizes the PSC 950xi > as a supported model without any problems, but "hp-setup" > reports an unknown model. If I manually create the queue with > the URI "hp:/usb/PSC_950xi?serial=MY21AC21J6WP" the > hp-toolbox tells me that the printer is an unknown model and > does not give me access to status and ink levels. > > If I edit the file /usr/share/hplip/data/xml/models.xml > copying the section '<model > name="PSC_900_Series">...</model>' and changing the first > line of the copy to be '<model name="PSC_950xi">' the PSC > 950xi works correctly. I can see ink levels, clean the > nozzles, scan, ... > > In addition I cannot fax. Also if I modify the line '<fax > type="0"/>' to'<fax type="1"/>' or '<fax type="2"/>' it does > not work. I can start "hp-sendfax" then, but I get an error > when the printer is supposed to dial. On the console from > where I have started hp-sendfax I get > > sendfax [ERROR]: Could not get into active state! > sendfax [ERROR]: D/L error state=2 > sendfax [ERROR]: Fax send error. > sendfax [ERROR]: Error, aborting. > > then. > > Till > > _______________________________________________ > Inkjet-list mailing list > [EMAIL PROTECTED] > http://www.linuxprinting.org/cgi-bin/mailman/listinfo/inkjet-list > ------------------------------------------------------- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid0709&bid&3057&dat1642 _______________________________________________ HPLIP-Devel mailing list HPLIP-Devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/hplip-devel
