Ok -- After following the instructions, hp-toolbox now works! Only a
couple of things:
The instructions say to run hp-setup, but I don't have that program.
I ran hp-makeuri instead and it seemed to work.
After testing printing I went to test the scanner, but I got the error message:
Failed to open device ' hpaio:/usb/PSC_2100_Series?serial=MY33HF52MY0F':
Error during device I/O
Any ideas on how to resolve that?
On 4/20/06, Gerald Britton <[EMAIL PROTECTED]> wrote:
> OK -- I'll try it later and report my results here tomorrow. Thanks
> for the explanation
>
> On 4/20/06, dwelch <[EMAIL PROTECTED]> wrote:
> > Gerald Britton wrote:
> > > I'm willing to try it, but the output from hp-info uses the hp: syntax
> > >
> > > $ hp-info
> > >
> > > HP Linux Imaging and Printing System (ver. 0.9.7)
> > > Device Information Utility ver. 3.2
> > >
> > > Copyright (c) 2003-5 Hewlett-Packard Development Company, LP
> > > This software comes with ABSOLUTELY NO WARRANTY.
> > > This is free software, and you are welcome to distribute it
> > > under certain conditions. See COPYING file for more details.
> > >
> > > Using device: hp:/usb/PSC_2100_Series?serial=MY33HF52MY0F
> > >
> > > In fact, all the utilities work *except* hp-toolbox. Seems rather odd to
> > > me.
> > >
> > >
> > >
> > > On 4/20/06, dwelch <[EMAIL PROTECTED]> wrote:
> > >
> > >>Gerald Britton wrote:
> > >>
> > >>>$ lpstat -v
> > >>>device for HP_PSC_2110:
> > >>>usb://Hewlett-Packard/PSC%202100%20Series?serial=MY33HF52MY0F
> > >>>
> > >>>On 4/20/06, dwelch <[EMAIL PROTECTED]> wrote:
> > >>>
> > >>>
> > >>>>Gerald Britton wrote:
> > >>>>
> > >>>>
> > >>>>>I do get a specific error message. See below:
> > >>>>>
> > >>>>>HP Linux Imaging and Printing System (ver. 0.9.7)
> > >>>>>HP Device Manager ver. 6.0
> > >>>>>
> > >>>>>Copyright (c) 2003-5 Hewlett-Packard Development Company, LP
> > >>>>>This software comes with ABSOLUTELY NO WARRANTY.
> > >>>>>This is free software, and you are welcome to distribute it
> > >>>>>under certain conditions. See COPYING file for more details.
> > >>>>>
> > >>>>>[DEBUG]: Connected to hpssd on localhost:32773
> > >>>>>toolbox [DEBUG]: Initializing toolbox UI
> > >>>>>toolbox [DEBUG]: Print command: hp-print -p%PRINTER%
> > >>>>>toolbox [DEBUG]: PCard command: hp-unload -d %DEVICE_URI%
> > >>>>>toolbox [DEBUG]: Fax command:
> > >>>>>toolbox [DEBUG]: Copy command:
> > >>>>>toolbox [DEBUG]: Scan command: xsane -V %SANE_URI%
> > >>>>>toolbox [DEBUG]: Email alerts: False
> > >>>>>toolbox [DEBUG]: Email address:
> > >>>>>toolbox [DEBUG]: SMTP server:
> > >>>>>toolbox [DEBUG]: Auto refresh: True
> > >>>>>toolbox [DEBUG]: Auto refresh rate: 30
> > >>>>>toolbox [DEBUG]: Using default 'C' locale
> > >>>>>toolbox [DEBUG]: Starting GUI loop...
> > >>>>>toolbox [DEBUG]: Rescanning device list...
> > >>>>>toolbox [DEBUG]: Exception: 4 (Unknown/invalid device-uri field)
> > >>>>>toolbox [DEBUG]: {}
> > >>>>>toolbox [DEBUG]: Cleaning up child processes.
> > >>>>>
> > >>>>>It looks like the problem is the Exception error message. Not sure
> > >>>>>what to do to make it work though
> > >>>>>
> > >>>>>
> > >>>>>Here's the detail info
> > >>>>>
> > >>>>>hp-info -ldebug
> > >>>>>
> > >>>>>HP Linux Imaging and Printing System (ver. 0.9.7)
> > >>>>>Device Information Utility ver. 3.2
> > >>>>>
> > >>>>>Copyright (c) 2003-5 Hewlett-Packard Development Company, LP
> > >>>>>This software comes with ABSOLUTELY NO WARRANTY.
> > >>>>>This is free software, and you are welcome to distribute it
> > >>>>>under certain conditions. See COPYING file for more details.
> > >>>>>
> > >>>>>[DEBUG]: Sending data on channel (3)
> > >>>>>[DEBUG]:
> > >>>>>'msg=probedevicesfiltered\nfilter=none\nbus=usb,par,cups\nformat=default\ntimeout=5\nttl=4\n'
> > >>>>>[DEBUG]: Reading data on channel (3)
> > >>>>>[DEBUG]:
> > >>>>>'msg=probedevicesfilteredresult\nresult-code=0\nnum-devices=1\nencoding=none\nlength=60\ndata:\nhp:/usb/PSC_2100_Series?serial=MY33HF52MY0F,PSC_2100_Series\n'
> > >>>>>[DEBUG]: ['hp:/usb/PSC_2100_Series?serial=MY33HF52MY0F']
> > >>>>>[DEBUG]: [<cupsext.Printer object at 0xb7aae700>]
> > >>>>>Using device: hp:/usb/PSC_2100_Series?serial=MY33HF52MY0F
> > >>>>>[DEBUG]: URI: backend=hp, is_hp=True, bus=usb, model=PSC_2100_Series,
> > >>>>>serial=MY33HF52MY0F, dev=, host=, port=1
> > >>>>>[DEBUG]: Model/UI model: PSC_2100_Series/HP PSC 2100 series
> > >>>>>
> > >>>>>[DEBUG]: Sending data on channel (5)
> > >>>>>[DEBUG]:
> > >>>>>'msg=opendevice\ndevice-uri=hp:/usb/PSC_2100_Series?serial=MY33HF52MY0F\n'
> > >>>>>[DEBUG]: Reading data on channel (5)
> > >>>>>[DEBUG]: 'msg=opendeviceresult\nresult-code=0\n'
> > >>>>>[DEBUG]: Sending data on channel (5)
> > >>>>>[DEBUG]:
> > >>>>>'msg=querymodel\ndevice-uri=hp:/usb/PSC_2100_Series?serial=MY33HF52MY0F\n'
> > >>>>>[DEBUG]: Reading data on channel (5)
> > >>>>>[DEBUG]:
> > >>>>>'msg=querymodelresult\ncopy-type=0\nscan-type=1\nfax-type=1\nr0-agent3-sku=58
> > >>>>>(C6658A)\ntech-type=2\nio-support=2\npcard-type=1\nio-mode=1\nio-scan-port=0\nr0-agent1-sku=56
> > >>>>>(C6656A) / 27 (C8727A)\nr0-agent2-sku=57 (C6657A) / 28
> > >>>>>(C8728A)\ncolor-cal-type=0\nr0-agent3-kind=3\npanel-check-type=1\ntech-class=DJGenericVIP\nr0-agent2-type=2\npq-diag-type=0\nclean-type=1\nresult-code=0\nalign-type=1\nicon=PSC_2100_Series.png\nr0-agent1-type=1\nsupport-type=2\nlinefeed-cal-type=0\nstatus-type=2\nmodel-ui=HP
> > >>>>>PSC 2100
> > >>>>>series\nio-mfp-mode=3\nembedded-server-type=0\nr0-agent3-type=3\nr0-agent2-kind=3\nio-control=0\nr0-agent1-kind=3\nmodel=PSC_2100_Series\n'
> > >>>>>[DEBUG]: Sending data on channel (5)
> > >>>>>[DEBUG]:
> > >>>>>'msg=querydevice\ndevice-uri=hp:/usb/PSC_2100_Series?serial=MY33HF52MY0F\n'
> > >>>>>[DEBUG]: Reading data on channel (5)
> > >>>>>[DEBUG]:
> > >>>>>'msg=querydeviceresult\ncups-printers=\nagent1-kind=3\nagent1-hp-ink=False\nscan-uri=hpaio:/usb/PSC_2100_Series?serial=MY33HF52MY0F\nagent2-type=2\nagent3-hp-ink=False\nagent2-hp-ink=False\nagent2-ack=False\nis-hp=True\n3bit-status-name=NoFault\ntop-door=1\nfax-uri=hpfax:/usb/PSC_2100_Series?serial=MY33HF52MY0F\nin-tray1=True\nresult-code=0\nserial=MY33HF52MY0F\nback-end=hp\nagent2-health-desc=OK\nagent1-dvc=0\ndevice-uri=hp:/usb/PSC_2100_Series?serial=MY33HF52MY0F\nrr=000000\nphoto-tray=0\npanel-line1=
> > >>>>>1 Copy / 100%\npanel-line2=\nagent2-sku=57 (C6657A) / 28
> > >>>>>(C8728A)\nport=1\nagent2-level-trigger=0\nrg=000\nagent2-desc=Tri-color
> > >>>>>cartridge\nagent1-known=False\nagent1-health=0\n3bit-status-code=24\nagent3-type=3\nstatus-code=1000\nrevision=3\ndev-file=\nstatus-desc=The
> > >>>>>printer is
> > >>>>>idle.\nagent3-level-trigger=7\nagent3-id=0\nagent3-virgin=False\nagent3-dvc=0\nagent3-sku=58
> > >>>>>(C6658A)\nagent3-known=False\nagent2-virgin=False\nagent1-health-desc=OK\nagent2-dvc=0\nagent2-kind=3\nhost=\nagent2-health=0\nagent2-known=False\nagent1-id=9\nagent2-level=33\nagent3-level=0\nagent3-health=1\nerror-state=0\ndevice-state=1\npanel=1\nin-tray2=False\nagent1-ack=False\nagent1-virgin=False\nagent1-level-trigger=0\nagent1-level=8\nrs=000000000\nagent3-health-desc=Not
> > >>>>>installed\nagent2-id=10\nagent1-type=1\nagent1-desc=Black
> > >>>>>cartridge\nagent3-kind=3\nr=0\ndeviceid=MFG:Hewlett-Packard;MDL:PSC
> > >>>>>2100
> > >>>>>Series;CMD:MLC,PCL,PML,DW-PCL,DYN;CLS:PRINTER;1284.4DL:4d,4e,1;SN:MY33HF52MY0F;S:0380008084021000002c1480008c2500021;AiO:0;\ncups-uri=hp:/usb/PSC_2100_Series?serial=MY33HF52MY0F\nduplexer=0\nagent3-ack=False\nsupply-door=0\nagent3-desc=Photo
> > >>>>>cartridge\nagent1-sku=56 (C6656A) / 27 (C8727A)\nmedia-path=3\n'
> > >>>>>Device Parameters:
> > >>>>>Parameter Value(s)
> > >>>>>----------------------------
> > >>>>>----------------------------------------------------------
> > >>>>>3bit-status-code 24
> > >>>>>3bit-status-name NoFault
> > >>>>>agent1-ack False
> > >>>>>agent1-desc Black cartridge
> > >>>>>agent1-dvc 0
> > >>>>>agent1-health 0
> > >>>>>agent1-health-desc OK
> > >>>>>agent1-hp-ink False
> > >>>>>agent1-id 9
> > >>>>>agent1-kind 3
> > >>>>>agent1-known False
> > >>>>>agent1-level 8
> > >>>>>agent1-level-trigger 0
> > >>>>>agent1-sku 56 (C6656A) / 27 (C8727A)
> > >>>>>agent1-type 1
> > >>>>>agent1-virgin False
> > >>>>>agent2-ack False
> > >>>>>agent2-desc Tri-color cartridge
> > >>>>>agent2-dvc 0
> > >>>>>agent2-health 0
> > >>>>>agent2-health-desc OK
> > >>>>>agent2-hp-ink False
> > >>>>>agent2-id 10
> > >>>>>agent2-kind 3
> > >>>>>agent2-known False
> > >>>>>agent2-level 33
> > >>>>>agent2-level-trigger 0
> > >>>>>agent2-sku 57 (C6657A) / 28 (C8728A)
> > >>>>>agent2-type 2
> > >>>>>agent2-virgin False
> > >>>>>agent3-ack False
> > >>>>>agent3-desc Photo cartridge
> > >>>>>agent3-dvc 0
> > >>>>>agent3-health 1
> > >>>>>agent3-health-desc Not installed
> > >>>>>agent3-hp-ink False
> > >>>>>agent3-id 0
> > >>>>>agent3-kind 3
> > >>>>>agent3-known False
> > >>>>>agent3-level 0
> > >>>>>agent3-level-trigger 7
> > >>>>>agent3-sku 58 (C6658A)
> > >>>>>agent3-type 3
> > >>>>>agent3-virgin False
> > >>>>>back-end hp
> > >>>>>cups-printers
> > >>>>>cups-uri hp:/usb/PSC_2100_Series?serial=MY33HF52MY0F
> > >>>>>dev-file
> > >>>>>device-state 1
> > >>>>>device-uri hp:/usb/PSC_2100_Series?serial=MY33HF52MY0F
> > >>>>>deviceid MFG:Hewlett-Packard;MDL:PSC 2100
> > >>>>>Series;CMD:MLC,PCL,PML,DW-PCL,DYN;CLS:PRINTER;1284.4DL:4d,
> > >>>>>4e,1;SN:MY33HF52MY0F;S:0380008084021000002c1480008c2500021
> > >>>>>;AiO:0;
> > >>>>>duplexer 0
> > >>>>>error-state 0
> > >>>>>fax-uri hpfax:/usb/PSC_2100_Series?serial=MY33HF52MY0F
> > >>>>>host
> > >>>>>in-tray1 True
> > >>>>>in-tray2 False
> > >>>>>is-hp True
> > >>>>>media-path 3
> > >>>>>panel 1
> > >>>>>panel-line1 1 Copy / 100%
> > >>>>>panel-line2
> > >>>>>photo-tray 0
> > >>>>>port 1
> > >>>>>r 0
> > >>>>>revision 3
> > >>>>>rg 0
> > >>>>>rr 0
> > >>>>>rs 0
> > >>>>>scan-uri hpaio:/usb/PSC_2100_Series?serial=MY33HF52MY0F
> > >>>>>serial MY33HF52MY0F
> > >>>>>status-code 1000
> > >>>>>status-desc The printer is idle.
> > >>>>>supply-door 0
> > >>>>>top-door 1
> > >>>>>
> > >>>>>Model Parameters:
> > >>>>>Parameter Value(s)
> > >>>>>----------------------------
> > >>>>>----------------------------------------------------------
> > >>>>>align-type 1
> > >>>>>clean-type 1
> > >>>>>color-cal-type 0
> > >>>>>copy-type 0
> > >>>>>embedded-server-type 0
> > >>>>>fax-type 1
> > >>>>>icon PSC_2100_Series.png
> > >>>>>io-control 0
> > >>>>>io-mfp-mode 3
> > >>>>>io-mode 1
> > >>>>>io-scan-port 0
> > >>>>>io-support 2
> > >>>>>linefeed-cal-type 0
> > >>>>>model PSC_2100_Series
> > >>>>>model-ui HP PSC 2100 series
> > >>>>>panel-check-type 1
> > >>>>>pcard-type 1
> > >>>>>pq-diag-type 0
> > >>>>>r0-agent1-kind 3
> > >>>>>r0-agent1-sku 56 (C6656A) / 27 (C8727A)
> > >>>>>r0-agent1-type 1
> > >>>>>r0-agent2-kind 3
> > >>>>>r0-agent2-sku 57 (C6657A) / 28 (C8728A)
> > >>>>>r0-agent2-type 2
> > >>>>>r0-agent3-kind 3
> > >>>>>r0-agent3-sku 58 (C6658A)
> > >>>>>r0-agent3-type 3
> > >>>>>scan-type 1
> > >>>>>status-type 2
> > >>>>>support-type 2
> > >>>>>tech-class DJGenericVIP
> > >>>>>tech-type 2
> > >>>>>
> > >>>>>Status History:
> > >>>>>Date/Time Status Description (code)
> > >>>>>----------------------------
> > >>>>>----------------------------------------------------------
> > >>>>>[DEBUG]: Sending data on channel (5)
> > >>>>>[DEBUG]:
> > >>>>>'msg=queryhistory\ndevice-uri=hp:/usb/PSC_2100_Series?serial=MY33HF52MY0F\n'
> > >>>>>[DEBUG]: Reading data on channel (5)
> > >>>>>[DEBUG]:
> > >>>>>'msg=queryhistoryresult\nresult-code=0\nencoding=none\nlength=59\ndata:\n\n2006,2,20,11,5,30,0,51,0,0,root,1000,The
> > >>>>>printer is idle.,'
> > >>>>>02/20/06 11:05:30 The printer is idle. (1000)
> > >>>>>
> > >>>>>[DEBUG]: Sending data on channel (5)
> > >>>>>[DEBUG]:
> > >>>>>'msg=closedevice\ndevice-uri=hp:/usb/PSC_2100_Series?serial=MY33HF52MY0F\n'
> > >>>>>[DEBUG]: Reading data on channel (5)
> > >>>>>[DEBUG]: 'msg=closedeviceresult\nresult-code=0\n'
> > >>>>>
> > >>>>>hp-check
> > >>>>>
> > >>>>>HP Linux Imaging and Printing System (ver. 0.9.7)
> > >>>>>Dependency/Version Check Utility ver. 1.0
> > >>>>>
> > >>>>>Copyright (c) 2003-5 Hewlett-Packard Development Company, LP
> > >>>>>This software comes with ABSOLUTELY NO WARRANTY.
> > >>>>>This is free software, and you are welcome to distribute it
> > >>>>>under certain conditions. See COPYING file for more details.
> > >>>>>
> > >>>>>Checking Python version...
> > >>>>>--> Version 2.4.2 installed.
> > >>>>>--> OK
> > >>>>>Checking for SIP...
> > >>>>>--> OK
> > >>>>>Checking for PyQt...
> > >>>>>--> OK
> > >>>>>Checking Qt version...
> > >>>>>--> Version 3.3.4 installed.
> > >>>>>--> OK
> > >>>>>Checking SIP version...
> > >>>>>--> Version 4.2.1 installed
> > >>>>>--> OK
> > >>>>>Checking PyQt version...
> > >>>>>--> Version 3.14.1 installed.
> > >>>>>--> OK
> > >>>>>
> > >>>>>On 4/20/06, Aaron J Albright <[EMAIL PROTECTED]> wrote:
> > >>>>>
> > >>>>>
> > >>>>>
> > >>>>>>Are you getting a specific error message?
> > >>>>>>
> > >>>>>>Can you go through the steps here:
> > >>>>>>
> > >>>>>>http://hplip.sourceforge.net/howtos/io.html
> > >>>>>>
> > >>>>>>and let me know your results?
> > >>>>>>
> > >>>>>>Thanks!
> > >>>>>>
> > >>>>>>Aaron
> > >>>>>>
> > >>>>>>Donnet Eric wrote:
> > >>>>>>
> > >>>>>>
> > >>>>>>
> > >>>>>>>Hi ,
> > >>>>>>>I have install on Ubuntu hplip by synaptic and when I make hp-toolbox
> > >>>>>>>the manager find any printer or my K60 is installed but dont print
> > >>>>>>>anything !
> > >>>>>>>
> > >>>>>>>Who's can Help me ?
> > >>>>>>>
> > >>>>>>>thanks a lot
> > >>>>>>>
> > >>>>>>>
> > >>>>>>>
> > >>>>>>>-------------------------------------------------------
> > >>>>>>>Using Tomcat but need to do more? Need to support web services,
> > >>>>>>>security?
> > >>>>>>>Get stuff done quickly with pre-integrated technology to make your
> > >>>>>>>job easier
> > >>>>>>>Download IBM WebSphere Application Server v.1.0.1 based on Apache
> > >>>>>>>Geronimo
> > >>>>>>>http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
> > >>>>>>
> > >>>>>>
> > >>>>>>
> > >>>>>>-------------------------------------------------------
> > >>>>>>Using Tomcat but need to do more? Need to support web services,
> > >>>>>>security?
> > >>>>>>Get stuff done quickly with pre-integrated technology to make your
> > >>>>>>job easier
> > >>>>>>Download IBM WebSphere Application Server v.1.0.1 based on Apache
> > >>>>>>Geronimo
> > >>>>>>http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
> > >>>>>>_______________________________________________
> > >>>>>>HPLIP-Help mailing list
> > >>>>>>[email protected]
> > >>>>>>https://lists.sourceforge.net/lists/listinfo/hplip-help
> > >>>>>>
> > >>>>>
> > >>>>>
> > >>>>>
> > >>>>>-------------------------------------------------------
> > >>>>>Using Tomcat but need to do more? Need to support web services,
> > >>>>>security?
> > >>>>>Get stuff done quickly with pre-integrated technology to make your job
> > >>>>>easier
> > >>>>>Download IBM WebSphere Application Server v.1.0.1 based on Apache
> > >>>>>Geronimo
> > >>>>>http://sel.as-us.falkag.net/sel?cmd=k&kid0709&bid&3057&dat1642
> > >>>>
> > >>>>Could you please run 'lpstat -v' and post the results?
> > >>>>
> > >>>>Thanks,
> > >>>>
> > >>>>-Don
> > >>>>
> > >>>>
> > >>>>
> > >>>>-------------------------------------------------------
> > >>>>Using Tomcat but need to do more? Need to support web services,
> > >>>>security?
> > >>>>Get stuff done quickly with pre-integrated technology to make your job
> > >>>>easier
> > >>>>Download IBM WebSphere Application Server v.1.0.1 based on Apache
> > >>>>Geronimo
> > >>>>http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
> > >>>>_______________________________________________
> > >>>>HPLIP-Help mailing list
> > >>>>[email protected]
> > >>>>https://lists.sourceforge.net/lists/listinfo/hplip-help
> > >>>>
> > >>>
> > >>>
> > >>>
> > >>>-------------------------------------------------------
> > >>>Using Tomcat but need to do more? Need to support web services, security?
> > >>>Get stuff done quickly with pre-integrated technology to make your job
> > >>>easier
> > >>>Download IBM WebSphere Application Server v.1.0.1 based on Apache
> > >>>Geronimo
> > >>>http://sel.as-us.falkag.net/sel?cmd=k&kid0709&bid&3057&dat1642
> > >>
> > >>Printers installed for use with HPLIP must use the "hp:" backend, not
> > >>the "usb:" backend.
> > >>
> > >>Remove the printer from CUPS and reinstall it using the instructions here:
> > >>
> > >>http://hplip.sourceforge.net/install/step4/index.html
> > >>
> > >>-Don
> > >>
> > >>
> > >>
> > >>
> > >>-------------------------------------------------------
> > >>Using Tomcat but need to do more? Need to support web services, security?
> > >>Get stuff done quickly with pre-integrated technology to make your job
> > >>easier
> > >>Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
> > >>http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
> > >>_______________________________________________
> > >>HPLIP-Help mailing list
> > >>[email protected]
> > >>https://lists.sourceforge.net/lists/listinfo/hplip-help
> > >>
> > >
> > >
> > >
> > > -------------------------------------------------------
> > > Using Tomcat but need to do more? Need to support web services, security?
> > > Get stuff done quickly with pre-integrated technology to make your job
> > > easier
> > > Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
> > > http://sel.as-us.falkag.net/sel?cmd=k&kid0709&bid&3057&dat1642
> > That's because hp-info is probing the local busses (usb and par) to find
> > devices. The toolbox doesn't work this way, it requires that a CUPS
> > queue using the "hp:" backend be installed for the device. This is
> > mostly because several bits of functionality in the toolbox requires
> > printing capability, whereas hp-info does not.
> >
> > You will find that hp-print, hp-testpage, and perhaps others also will
> > have this requirement.
> >
> > Also, by not using the "hp:" backend, printer status (during a print)
> > will not work.
> >
> > -Don
> >
> >
> >
> >
> >
> >
> >
> > -------------------------------------------------------
> > Using Tomcat but need to do more? Need to support web services, security?
> > Get stuff done quickly with pre-integrated technology to make your job
> > easier
> > Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
> > http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
> > _______________________________________________
> > HPLIP-Help mailing list
> > [email protected]
> > https://lists.sourceforge.net/lists/listinfo/hplip-help
> >
>
-------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid0709&bid&3057&dat1642
_______________________________________________
HPLIP-Help mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/hplip-help
