Re: [Hplip-help] Hp Photosmart 7450

Thu, 01 Jun 2006 16:56:57 -0700

i compiled as the following

./configure --prefix=/usr --libdir=/usr/lib64 --disable-network-build  --disable-pp-build



On 6/1/06, Allix Davis <[EMAIL PROTECTED]> wrote:
i think some interesting results are found including some missing deps..

bash-3.1# hp-check


HP Linux Imaging and Printing System (ver. 0.9.11)
Dependency/Version Check Utility ver. 2.0


Copyright (c) 2003-6 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

Basic system info...
--> Linux allix 2.6.16.1 #2 Wed Apr 5 11:33:35 BST 2006 x86_64 AMD Athlon(tm) 64                                                                                                    Processor 3200+ AuthenticAMD GNU/Linux

Currently (previously) installed version...
--> 0.9.11

Checking Python version...
--> Version 2.4.3 installed.
--> OK

Checking for user interface dependencies...
Checking for SIP...
--> OK
Checking for PyQt...
--> OK
Checking Qt version...
--> Version 3.3.5 installed.
--> OK
Checking SIP version...
--> Version 4.4.3 installed
--> OK
Checking PyQt version...
--> Version 3.16.0 installed.
--> OK

Checking for library dependencies...
Checking for libsnmp...
 [ERROR]: Not found.
Checking for libjpeg...
--> OK
Checking for libusb...
--> OK
Checking for libcrypto...
--> OK
Checking for libpthread...
--> OK

Checking for application dependencies...
Checking ghostscript...
--> Version 8.01
Checking gcc...
--> gcc (GCC) 3.4.4
--> OK
Checking automake...
--> automake (GNU automake) 1.9.4
--> OK
Checking autoconf...
--> autoconf (GNU Autoconf) 2.59
--> OK
Checking make...
--> GNU Make 3.81
--> OK
Checking ReportLab (optional)...
 [WARNING]: Not installed. Fax coverpage support will be disabled.

Checking kernel module...
Checking for ppdev (optional)...
 [WARNING]: Not found. Parallel printers will not work properly with HPLIP.

Checking for CUPS...
--> scheduler is running
--> OK

Checking existing CUPS queues...
No queues found.

If any errors or warnings were reported, please refer to the installation instructions at:
http://hplip.sourceforge.net/install/index.html




On 6/1/06, Allix Davis < [EMAIL PROTECTED]> wrote:
i am connecting the printer to a stand alone box using a usb cable


bash-3.1$ lsmod | grep usb
usblp                  14592  0
usb_storage            73792  0


from dmesg

usb 3-1: new full speed USB device using uhci_hcd and address 2
usb 3-1: configuration #1 chosen from 1 choice
Initializing USB Mass Storage driver...
scsi2 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 pr
oto 2 vid 0x03F0 pid 0xB802
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
usbcore: registered new driver ub
  Vendor: HP        Model: Photosmart 7400   Rev: 1.00
  Type:   Direct-Access                      ANSI SCSI revision: 02
sd 2:0:0:0: Attached scsi removable disk sdb
sd 2:0:0:0: Attached scsi generic sg1 type 0
usb-storage: device scan complete




On 6/1/06, Allix Davis <[EMAIL PROTECTED]> wrote:
from root

 bash-3.1#hp-setup -a

HP Linux Imaging and Printing System (ver. 0.9.11)
Printer/Fax Setup Utility ver. 2.0

Copyright (c) 2003-6 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

 [ERROR]: No devices found.
 [ERROR]: Error occured during interactive mode. Exiting.



On 5/31/06, Allix Davis < [EMAIL PROTECTED]> wrote:
lpstat -v returns nothing




On 5/31/06, Allix Davis < [EMAIL PROTECTED]> wrote:
sorry, i noticed i typed something wrong




here it is again from root

bash-3.1# /usr/share/hplip/hplip restart

Stopping hpiod:                                            [  OK  ]
Stopping hpssd:                                            [  OK  ]
Starting hpiod:                                            [  OK  ]
Starting hpssd:                                            [  OK  ]

bash-3.1# ./rc.cups.new restart
cups: restarted scheduler.
bash-3.1# /usr/lib64/cups/backend/hp
direct hp:/no_device_found "Unknown" "hp no_device_found"


bash-3.1# lsmod | grep usb
usblp                  14592  0
usb_storage            73792  0




On 5/31/06, Allix Davis <[EMAIL PROTECTED]> wrote:
Hello

this is all from root

bash-3.1# /usr/lib64/cups/backend/hp
unable to connect hpiod socket 50783: Connection refused: prnt/hpijs/hplip_api.c 702

bash-3.1# /usr/share/hplip/hplip.sh restart
Stopping hpiod:                                            [  OK  ]
Stopping hpssd:                                            [  OK  ]
Starting hpiod:                                            [FAILED]
Starting hpssd:                                            [FAILED]

bash-3.1# ./rc.cups.new restart
cups: restarted scheduler.
bash-3.1#

bash-3.1# /usr/lib64/cups/backend/hp
unable to connect hpiod socket 50783: Connection refused: prnt/hpijs/hplip_api.c 702
bash-3.1#

bash-3.1# lsmod | grep usb
usblp                  14592  0
usb_storage            73792  0

thanks in advance






_______________________________________________
HPLIP-Help mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/hplip-help






















					Reply via email to